17
You can also select a monitor memory
by repeatedly pressing MONITOR until
the desired monitor memory appears.
Note: To listen to the monitor memories,
the priority channel feature must be
turned off (see “Priority” on Page 20).
MOVING A FREQUENCY FROM A MONITOR MEMORY TO A CHANNEL
1. If the scanner is scanning, press
MANUAL.
2. Use the numbe r keys to enter the
channel number where you want to
store the monitor frequency, then
press
PROGRAM.
PGM appears.
3. Press MONITOR. The channel num-
ber flashes and the frequency
stored in the monitor memory and
the monitor memory’s number
appear.
4. Use the numbe r keys to enter the
monitor memory number that has
the frequency you want to store into
the channel. The frequency ap-
pears.
5. Press
E. The scanner stores the fre-
quency in the selected channel.
DELETING A FREQUENCY FROM A CHANNEL
1. If the scanner is scanning, p ress
MANUAL.
2. Us e the number keys to enter the
channel number containing the fre-
quency you want to delete.
3. Press PROGRAM.
4. Press 0 then E. The frequency is
deleted.
To replace a frequency stored in a moni-
tor memory, store a new frequency in
that monitor memory.
SCANNING CHANNELS
Note: You cannot scan channels until
you have stored frequencies in them.
To scan channels stored in the channel-
storage banks, press SCAN. The scan-
ner scans through all channels in the ac-
tive banks.
To select one or more channel-storage
banks while scanning, select each bank
you want to scan by pressing its number
key so the bank’s number appears on
the display.
Note: The channels for each bank are
listed above the scanner’s number keys.
To turn off channel-storage banks, press
the number key for each of the bank(s)
so the bank’s number disappears. The
scanner does not scan any of the stored
channels within banks you have turned
off.
20-422.fm Page 17 Friday, January 7, 2000 12:54 PM