Manuals / Radio Shack / Kitchen Appliance / Range

Radio Shack 22-218 Replacing The Fuse, Your meter is protected by a 315 mA fuse, Warnings

Models: 22-218

1 40

Download 40 pages 20.4 Kb

Page 15

REPLACING THE FUSE

REPLACING THE FUSE

Your meter is protected by a 315 mA fuse.

WARNINGS:

•TO AVOID ELECTRIC SHOCK, DISCONNECT BOTH TEST LEADS FROM ANY EQUIPMENT BEFORE YOU REMOVE THE FUSE.

•DO NOT OPERATE THE METER UNTIL YOU REPLACE THE FUSE AND CLOSE THE BACK COVER.

15

Image 15

Radio Shack 22-218 owner manual Replacing The Fuse, Your meter is protected by a 315 mA fuse, Warnings

Contents

Please read before using this equipment Cat. No8-RangeMultitester FEATURES Cautions A WORD ABOUT SAFETY Page Page Page SPECIFICATIONS RangesAccuracy Dimensions WeightOperating Temperature Storage TemperatureSPECIAL PANEL MARKINGS Page WARNINGS INSTALLING A BATTERY3. Remove the back of the meter Follow these steps to install the battery5.Replace the back and secure it with the screw REPLACING THE FUSE Your meter is protected by a 315 mA fuseWARNINGS Follow these steps to replace the fuse 3.Remove the back of the meter 4.Replace the blown fuse with a new one5.Replace the back and secure it with the screw Cautions OPERATIONWarnings MAKING ACCURATE MEASUREMENTS Page MEASURING VOLTAGE Zero AdjustmentMeasuring High Voltages Page Measuring DC Voltage Follow these steps to measure DC voltage 2.Connect the test probes to the circuit3.Read the voltage on the scale Measuring AC Voltage Follow these steps to measure AC voltage 2.Connect the test probes to the circuit3.Read the voltage on the scale Measuring 3-PhaseAC Voltage 600volts, the line-to-linevoltage would be 600 Volts x 1.732 = 1039.2 Volts Measuring AC Voltage on a DC Source Bias 1. Set the function selector to 150 mA DC MEASURING DC CURRENTPage WARNINGS MEASURING RESISTANCEPage Page MAINTENANCE Page Page We Service What We Sell RADIO SHACK A Division of Tandy Corporation