Manuals / Radio Shack / Kitchen Appliance / Range

Radio Shack 22-218 owner manual Warnings

Models: 22-218

1 40

Download 40 pages 20.4 Kb

Page 19

Warnings:

Warnings:

•Do not try to measure any voltage over the meter’s rat- ing. Use extreme care when you use these high-voltage ranges.

•Never connect the probe you plug into the negative (–)terminal to a source of voltage more than 500 V. Doing so can create a serious shock hazard.

19

Image 19

Radio Shack 22-218 owner manual Warnings

Contents

Cat. No Please read before using this equipment8-RangeMultitester FEATURES Cautions A WORD ABOUT SAFETY Page Page Page Ranges SPECIFICATIONSAccuracy Dimensions WeightOperating Temperature Storage TemperatureSPECIAL PANEL MARKINGS Page WARNINGS INSTALLING A BATTERY3. Remove the back of the meter Follow these steps to install the battery5.Replace the back and secure it with the screw Your meter is protected by a 315 mA fuse REPLACING THE FUSEWARNINGS Follow these steps to replace the fuse 4.Replace the blown fuse with a new one 3.Remove the back of the meter5.Replace the back and secure it with the screw Cautions OPERATIONWarnings MAKING ACCURATE MEASUREMENTS Page MEASURING VOLTAGE Zero AdjustmentMeasuring High Voltages Page Measuring DC Voltage 2.Connect the test probes to the circuit Follow these steps to measure DC voltage3.Read the voltage on the scale Measuring AC Voltage 2.Connect the test probes to the circuit Follow these steps to measure AC voltage3.Read the voltage on the scale Measuring 3-PhaseAC Voltage 600volts, the line-to-linevoltage would be 600 Volts x 1.732 = 1039.2 Volts Measuring AC Voltage on a DC Source Bias 1. Set the function selector to 150 mA DC MEASURING DC CURRENTPage WARNINGS MEASURING RESISTANCEPage Page MAINTENANCE Page Page We Service What We Sell RADIO SHACK A Division of Tandy Corporation