Selecting the Adaptaplug
6
•Yellow (D) — 5.5 ⋅ 3.3 mm with 1.4
mmpin
•Green (Q) — 6.3 ⋅ 3 mm
•Yellow (T) — 6.5 ⋅ 4.3 mm with 1.9
mmpin
•Orange (H) — 3.4 ⋅ 1.3 mm
1.Refer to “Compatible Computers” on Page 11 or examine the output connector of your computer’s AC adapter and compare it to the Adaptaplugs supplied with your power adapter.
2.Select the Adaptaplug that resembles the original plug and test it by temporarily inserting it into the device to be powered. The center contact or pin must be the correct size to ensure proper electrical contact. If it is too small or large, additional Adaptaplugs are available from your local RadioShack store.
3.Connect the Adaptaplug to the output socket at the end of the power adapter’s cord.
If the tip on the device’s power jack is positive, align + (positive) marked on the Adaptaplug to TIP marked on the output socket. If the
