Radio Shack 32-1167 100%6+105, 100%6+0/+%412*105, 100%6+0#0640#.#7&+1 %1/21006, 100%6+061#68

R"9#40+0)"R"

To avoid electrical shock, do not connect the system to AC power until all other connections are complete.

."%#76+10".

The supplied power cord has a polarized plug that fits into the outlet only one way. If the plug does not fit properly, turn it over and try again. Do not force it.

±"016'"±"

For TVs that do not have an audio/ video input jack, use a video RF modulator. Connect the RF modulator to VIDEO OUT and to the TV’s 75-ohm VHF input terminal, following the instructions in the modulator’s owner’s manual.

%100'%6+105

%100'%6+0)"/+%412*10'5

The system has two microphone jacks so you can use the supplied microphone to sing along to your favorite recordings, and connect an additional microphone (not supplied) for duets, or lead and background vocals.

For the best performance, the additional microphone should be a unidirectional 600-ohm dynamic microphone with a 1/4 inch (6.35-mm) plug and an ON/OFF switch.

Before you connect a microphone, always set MIC VOLUME to MIN.

If you are connecting only one microphone, plug it into MIC 1. If you are adding a second microphone, plug it into MIC 2.

%100'%6+0)"#0"':6'40#."#7&+1" %1/210'06

You can broadcast the karaoke system’s sound through an external audio component such as a PA system amplifier. Connect the external audio component’s audio input jacks to the karaoke system’s AUX OUT R and L jacks.

%100'%6+0)"61"#"68

You can connect the CD/CDG karaoke system to a TV or monitor and see the words and images produced by CDG. Plug one end of the supplied cable into VIDEO OUT jack and the other end into your TV’s VIDEO IN jack.±

%100'%6+0)"219'4

When you have made all other connections, plug your system’s power cord into a standard AC outlet.Rý.

4