Effect List

￿'+￿￿￿

￿￿+￿

￿'$-#"￿$

￿￿￿￿+￿#￿￿(

 

 

 

 

 

 

 

 

 

 

 

0: Delay Time (0 to 127) – Adjusts the delay time.

 

 

 

1: Wet Level (0 to 127) – Adjusts the level of the effect sound.

 

 

 

2: Feedback (0 to 127) – Adjusts the repeat of the delay.

 

Stereo

This is a cross feedback delay of stereo input

3: High Damp (0 to 127) – Adjusts damping of the high-range delay sound. The

21

smaller the value, the greater the damping of high-range delay sound.

Delay 2

and output.

 

4: Ratio L (0 to 127) – Adjusts the delay time of the left channel, proportional to

 

 

 

 

 

 

the value set for Delay Time.

 

 

 

5: Ratio R (0 to 127) – Adjusts the delay time of the right channel, proportional to

 

 

 

the value set for Delay Time.

 

 

 

0: Delay Time (0 to 127) – Adjusts the delay time.

 

 

 

1: Wet Level (0 to 127) – Adjusts the level of the effect sound.

 

 

 

2: Feedback (0 to 127) – Adjusts the repeat of the delay.

 

 

 

3: High Damp (0 to 127) – Adjusts damping of the high-range delay sound. The

 

 

 

smaller the value, the greater the damping of high-range delay sound.

22

3-Tap Delay

This is left/center/right 3-tap delay.

4: Ratio L (0 to 127) – Adjusts the delay time of the left channel. Proportional to

 

 

 

the value set for Delay Time.

 

 

 

5: Ratio C (0 to 127) – Adjusts the delay time of the center channel. Proportional

 

 

 

to the value set for Delay Time.

 

 

 

6: Ratio R (0 to 127) – Adjusts the delay time of the right channel. Proportional to

 

 

 

the value set for Delay Time.

 

 

 

 

 

 

 

0: LPF (0 to 127) – Adjusts the cutoff frequency of the low-pass filter. A smaller

 

 

 

value cuts the high range.

 

 

 

1: HPF (0 to 127) – Adjusts the cutoff frequency of the high-pass filter. A larger

 

 

 

value cuts the low range.

23

Gate

This is a fader that creates artificial reverb that

2: Feedback (0 to 127) – Adjusts the repeat of the reverb.

Reverb

sounds like it is being cut with a gate.

3: High Damp (0 to 127) – Adjusts damping of the high-range delay sound. The

 

 

 

 

smaller the value, the greater the damping of high-range delay sound.

 

 

 

4: Diffusion (0 to 127) Provides fine adjustment of the reverb.

 

 

 

5: Wet Level (0 to 127) – Adjusts the level of the effect sound.

 

 

 

6: Dry Level (0 to 127) – Adjusts the level of the original sound.

 

 

 

0: LPF (0 to 127) – Adjusts the cutoff frequency of the low-pass filter. A smaller

 

 

 

value cuts the high range.

 

 

 

1: HPF (0 to 127) – Adjusts the cutoff frequency of the high-pass filter. A larger

 

Reverse

 

value cuts the low range.

 

This is gate reverb with a reverse rotation

2: Feedback (0 to 127) – Adjusts the repeat of the reverb.

24

Gate

effect.

3: High Damp (0 to 127) – Adjusts damping of the high-range reverb sound. The

 

Reverb

 

 

smaller the value, the greater the damping of high-range reverb sound.

 

 

 

 

 

 

4: Diffusion (0 to 127) Provides fine adjustment of the reverb.

 

 

 

5: Wet Level (0 to 127) – Adjusts the level of the effect sound.

 

 

 

6: Dry Level (0 to 127) – Adjusts the level of the original sound.

 

 

 

 

 

 

 

0: Type (0 to 7) Selects from among the eight available reflection patterns.

25

Reflection

This is an effector that extracts the first reflected

1: Wet Level (0 to 127) – Adjusts the level of the effect sound.

sound from a reverb sound.

2: Feedback (0 to 127) – Adjusts the repeat of the reflected sound.

 

 

 

 

 

3: Tone (0 to 127) – Adjusts the tone of the reflected sound.

 

 

 

0: LFO Rate (0 to 127) – Adjusts the rate of the LFO.

26

Reflection

This is a flanger in accordance with a sine wave

1: LFO Depth (0 to 127) – Adjusts the depth of the LFO.

LFO.

2: Feedback (-64 to +63) – Adjusts the feedback of the sound.

 

 

 

 

 

3: Wet Level (0 to 127) – Adjusts the level of the effect sound.

 

 

 

 

 

 

 

0: Tone (0 to 127) – Adjusts the tone of the reverb sound.

 

 

 

1: Time (0 to 127) – Adjusts the reverb time.

27

Reverb

This is an effector that preserves the breadth of

2: High Damp (0 to 127) – Adjusts damping of the high-range reverb sound. The

a sound by adding a reverb sound.

smaller the value, the greater the damping of high-range reverb sound.

 

 

 

 

 

3: ER Level (0 to 127) – Adjusts the level of the initial reflection.

 

 

 

4: Wet Level (0 to 127) – Adjusts the level of the effect sound.

 

 

 

0: Delay Time (0 to 127) – Adjusts the delay time.

 

 

 

1: Wet Level (0 to 127) – Adjusts the level of the effect sound.

 

 

 

2: Feedback (0 to 127) – Adjusts the repeat of the delay.

 

 

 

3: High Damp (0 to 127) – Adjusts damping of the high-range delay sound. The

28

2-Tap Delay

This is left/right 2 tap delay.

smaller the value, the greater the damping of high-range delay sound.

 

 

 

4: Ratio L (0 to 127) – Adjusts the delay time of the left channel, proportional to

 

 

 

the value set for Delay Time.

 

 

 

5: Ratio R (0 to 127) – Adjusts the delay time of the right channel, proportional to

 

 

 

the value set for Delay Time.

 

 

 

 

36

Page 36
Image 36
Radio Shack 42-4058 owner manual Lfo