For added flexibility and control as you make music, you can connect an optional sustain pedal, available through your local RadioShack store or online at www.radioshack.com. A sustain pedal lets you sustain or soften the keyboard’s sound, or even start and stop an auto-rhythm.
To connect a sustain pedal to your keyboard, insert the pedal’s plug into SUSTAIN/ASSIGNABLE JACK on the back of the keyboard.
You can adjust the keyboard to these settings when you use a sustain pedal.
$!$ (Sustain)—Causes one or more notes to linger after they are played.

the display is the number of “cents” to which the keyboard is currently tuned, compared to its default pitch.

2.Within 5 seconds, repeatedly press or + to lower or raise the keyboard’s pitch. Each time you press the key, the number decreases or increases by 1 cent.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Your keyboard’s touch response feature lets you adjust the volume of your music’s tone based on how hard you strike the key(s), so you can add emotion to your music.

1.Press TOUCH/TRANSPOSE/SETTING.

￿￿03￿ and the current setting (default: ￿￿ ￿￿#￿￿￿) appear.

2.Within 5 seconds, repeatedly press or + to select the touch response level, ￿￿￿￿

￿￿03￿, ￿￿￿￿￿￿￿, ￿￿￿￿#￿￿￿, or ,￿￿￿￿￿￿.

At the ￿￿￿￿￿￿setting, light key pressure results in a loud sound, and very heavy

key pressure results in a more powerful sound. When you select ￿￿￿￿￿￿03￿, the indicator next to TOUCH RESPONSE disappears and the tone does not change regardless of how you press the key. ￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

$￿" (Sostenuto)—Similar to sustain, but only sustains the key that was pressed when you press the pedal.

$￿￿ (Soft)—Softens the sound.

#￿￿￿— Starts or stops the selected rhythm.

Follow these steps to change the setting for

SUSTAIN/ASSIGNABLE JACK.

1.Press TOUCH/TRANSPOSE/SETTING, then repeatedly press ￿ or ￿ (CURSOR) until ￿￿￿-5￿34appears.

2.Repeatedly press ￿ (ENTER) then repeatedly press ￿ or ￿ (CURSOR) until 5￿34 and the current setting (default: $!$) appear.

3.Within 5 seconds, repeatedly press + or

– until the desired setting ($!$, $￿$, $￿￿, or #￿￿) appears.

Press the sustain pedal as you play to hear the desired sound or to start/stop the selected auto-rhythm.

￿￿!￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

1.Press TOUCH/TRANSPOSE/SETTING, then repeatedly press ￿ or ￿ (CURSOR) until ￿￿￿-5￿34appears.

2.Press ￿ (ENTER). ￿)￿￿￿'￿#￿"￿￿appears.

3.Within 5 seconds, repeatedly press + or

until you can view the display clearly. The number changes from 0 to 12.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

The keyboard retains various settings even when you turn the power off, so long as you do not disconnect power. You can, however, delete or initialize some settings without deleting others.

1.Press TOUCH/TRANSPOSE/SETTING, then repeatedly press ￿ or ￿ (CURSOR) until <'￿￿-￿￿￿appears.

2.Press ￿ (ENTER). <'￿￿￿1￿=> appears.

3.Within 5 seconds, repeatedly press

￿ or ￿ (CURSOR) until the item you want to reset appears.

<'￿￿1￿=>￿— Initializes the mixer parameters you assigned by the mixer function or by input from an external sequencer.

<'￿￿%￿#>￿— Initializes all parameters, except for the display contrast setting.

#￿￿￿'''￿￿￿￿>￿— Deletes the data of the user rhythm number nnn. See “Using the Data Download Service” on Page 21.

<'￿￿$￿">￿— Deletes all data in the user area.

4.Press YES. $0#￿> appears, prompting you to confirm the initialization/deletion. Press YES again. The keyboard completes initialization/deletion and exits the menu setting mode.

￿￿￿￿￿￿￿￿￿

The touch response setting does not affect memory playback, auto accompaniment, or received MIDI data.

The MIDI data sent out from the keyboard is affected by the touch response setting.

Special Features

15

Page 15
Image 15
Radio Shack 42-4058 owner manual Current setting default # appear, Special Features