1088A90A.fm Page 12 Tuesday, August 17, 1999 8:46 AM
OPERATION
MAKING AND RECEIVING CALLS
To make or answer a call, lift the hand- set. Or, if the handset is not in place on the base, press TALK. The TALK/ BATT LOW indicator on the handset and the IN USE indicator on the base light.
BATT LOW indicator blinks, and the handset beeps, followed by a brief pause as your phone searches for a clear channel.
Note: If the handset is too far from the base, the channel might not change. Move closer to the base and try again.
To end a call, place the handset on the base or press TALK so the TALK/BATT LOW indicator turns off.
Note: If you press TALK to hang up the phone and the phone does not discon- nect, press TALK again while holding the handset closer to the base or place the handset on the base.
SETTING THE HANDSET VOLUME
To change the volume you hear through the handset, press VOLUME during a call. The handset volume has two settings, high or low.
SELECTING THE
CHANNEL
The phone scans 40 channels (fre- quency pairs used between the base and the handset) and automatically se- lects a clear channel each time you make or receive a call.
If you hear other conversations or ex- cessive noise during a call, press CH to select a different channel. The TALK/
USING REDIAL
You can quickly dial the last number di- aled. When you hear a dial tone, sim- ply press REDIAL/P.
12
