1088A90A.fm Page 18 Tuesday, August 17, 1999 8:46 AM

Problem

Suggestion

 

 

 

 

Handset does not ring or receive a page.

Lift the base’s antenna to a fully vertical posi-

 

tion.

 

 

 

Move the handset closer to the base.

 

 

 

Move the base away from other electrical de-

 

vices.

 

 

 

Return the handset to the base to recharge

 

the battery pack.

 

 

The handset stops working or works

Move the handset closer to the base.

poorly during a call.

 

Lift the base’s antenna to a fully vertical posi-

 

 

tion.

 

 

 

If the base lost power while the handset was

 

off of it, the security access-protection code

 

might have changed. With the handset re-

 

moved from the base, restore power to the

 

base, then place the handset back on the

 

base. The CHARGE indicator lights, indicat-

 

ing that the code is set again.

 

 

 

Be sure the handset’s battery pack is

 

charged. (If the battery pack power is too low,

 

it does not have enough power to light the

 

TALK/BATT LOW indicator.)

 

 

If you still have problems, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the prob- lem, take your phone to your local RadioShack store for assistance.

18

Page 18
Image 18
Radio Shack 43-1088A, 43-1090A owner manual 1088A90A.fm Page 18 Tuesday, August 17, 1999 846 AM