Radio Shack 43-3558 Memory Dialing, Setting the Language, Storing Phone Numbers and Names

•If you are not sure of your dialing system, set for tone dialing. Make a trial call.

If the call connects, leave the setting as is, otherwise set for pulse dialing.

•If your phone system requires pulse dialing and you need to send the DTMF tones for certain situations during a call, you may “switch-over” to tone dialing. (Refer to “Tone Dialing Switch-over” on page 15.)

Setting the Language

1.When the phone is in the standby mode, press and hold CID/MENU.

2.Press VOL key four times to select ¨Language¨.

3.Press SELECT to toggle between ¨Eng¨(English), ¨Fr.¨(French) and ¨Esp¨(Spanish) for each setting.

4.Press END or return the handset to the base unit to complete the setting. The handset returns to the standby mode.

MEMORY DIALING

STORING PHONE NUMBERS AND NAMES

Memory Dialing allows you to dial a number using just a few key presses. Your cordless telephone stores up to ten names/numbers in the handset. Ô

1.Press MEM, ¨Select Memory¨ is displayed.

2.Press VOL or VOL keys, or enter a number (0 - 9) to select the memory location where you would like to store the number.

Ô NOTE Ô

In memory dialing operation, you must press a key within 30 seconds or the phone will return to the standby mode. If you return the handset to the base, the phone will return to the standby mode also.

Memory Dialing

19