Expanding Your Phone
Ô NOTE Ô
Handsets can be in Direct Link mode while other handsets are in use. To use the
When Registration Complete is displayed, the handset has been
registered to the base. If Registration Failed appears,
please try these steps again.
USING THE DIRECTLINK MODE
To use this feature, you must enter the two handsets into the DirectLink mode first. Ô
To enter the DirectLink mode, see “Using DirectLink Mode” on page 17.
DirectLink call
1.When the phone is in the DirectLink standby mode, press the DirectLink soft key.
2.Select the handset to which you wish to DirectLink by pressing the number keys
3.On the receiving handset, press
TALK/FLASH, the ANSWER soft key or if Anykey Answer is on, press any number key, /TONE/< or #/>.
4.When you finish your conversation, press END or the END soft key on either handset.
5.To cancel DirectLink mode, return the handset to the cradle, or press the CANCEL soft key and then the OK soft key.
52