![](/images/new-backgrounds/1205487/2054879x1.webp)
The Basics
setting up your learning laptop
using an ac/dc adapter
The Basics
using your learning laptop
To power your laptop from a standard AC outlet or vehicle battery power, you need an
1.Set the voltage switch on the adapter to 6V.
2.Attach the Adaptaplug™ to the adapter’s cord with the switch set to positive.
3.Insert the adapter’s barrel plug into the laptop’s DC 6V jack. Plug the other end of the adapter into the power source.
Arrow
Keys
OFF
Play
Shift
Repeat
Clear
ON/Mode
ENTER
Settings
Help/
Save
Draw/
Move
Backspace/
Erase
|
| Barrel | |
Voltage | DC 6V | Plug | |
Jack | Adapter | ||
Switch | |||
| Cord | ||
|
|
caution
•Use a (Class 2 for AC) power source that supplies 6V DC and delivers at least 300 mA. Its center tip must be set to positive and its plug must fit the laptop’s DC 6V jack.
•Using an adapter that does not meet these specifications could damage the laptop or the adapter.
•Do not leave the laptop plugged in when you are not using it.
turning the laptop on and off
1.Press ON/Mode to turn on the laptop.
2.Press OFF to turn off the laptop.
If you do not press any key for about three minutes, NOTE the laptop says
turns off automatically to save power. To turn it back on, press ON/Mode.
select your settings
Press Settings (the key with a tool on it) and a screen will appear. Move the cursor either by keypad or mouse to select an option. Press ENTER to select.
8 | 9 |