R"9#40+0)ýR"
Do not use the surge protector with an aquarium or near wet locations.
±"016'"±"
•Use appropriate mounting anchors if you are mounting the surge protector to drywall.
•The appropriate screw size is shown on the mounting template.
5#('6;"24'%#76+105
Your surge protector connects your fax, modem or other data line to a telephone line. When using telephone lines, it is important to follow these safety precautions.R
•Never install telephone wiring during a lightning storm.
•Never install a telephone jack in wet locations unless the jack is specifically designed for use in wet locations.
•Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
•Use caution when installing or modifying telephone lines.
/1706+0)"6*'" 574)'"2416'%614
You can place the surge protector on a level surface or mount it on a wall. Select a location that is:
•near a grounded AC outlet
•near a telephone wall jack
•out of the way of normal activities
1.Use the supplied mounting template to mark the holes on the selected location.
2.Drive in two wood screws (not supplied)
with heads that fit into the keyhole slots on the bottom of the surge protector.±
3.Align the surge protector’s keyhole slots with the wood screws, then press the surge protector down to secure it.
75+0)"6*'"%#$.'" /#0#)'/'06"4#%-
The five cable grooves on the top cable rack and the four cable grooves on the bottom let you place the related cable groups together for easy identification. (See inset illustration below.)
1.Slide the cable management rack all the way out until it stops.
2.To snap cables into the grooves at the top of the cable management rack, connect the cables to the surge protector then snap the cables into the top grooves.
To snap cables into the grooves at the bottom of the management rack, route the cables below the rack’s frame and connect the cables to the surge protector, then snap the cables into the bottom grooves.
±"016'"±"
FAX/MODEM IN and LAN IN share the same RJ45 jack (FAX/MODEM/LAN IN). You cannot connect both a Fax/Modem and LAN at the same time.
%100'%6+105
%100'%6+0)"#"6'.'2*10'".+0'
Cable Management Rack
1. | Turn the surge protector off. Press | jack, and the other end to a telephone |
| POWER. POWER pops up, and the ON | wall jack.± |
| indicator goes out. | 3. Connect one end of an existing |
|
| |
2. | Connect one end of a modular | telephone cord (not supplied) to the |
| telephone cord (not supplied) to the | surge protector's FAX/MODEM OUT jack |
| surge protector's FAX/MODEM/LAN IN | (RJ11), and the other end to your fax, |
|
| modem, or telephone. |
2
