±"016'"±"

The channel settings must be the same for the transmitter and the receiver. If the door chime occasionally sounds without anyone pressing BELL, change the channel settings for both the transmitter and receiver.

±"016'"±"

Press BELL until the transmitter’s indicator lights. Otherwise, the receiver may not work properly.

If you don't want to hear the door chime, slide ON/OFF on the receiver to OFF.

3.Install three AAA batteries as indicated by the polarity symbols (+ and –) marked inside.

4.Replace the compartment door. If the transmitter's LED indicator dims, replace the batteries.

+0"6*'"4'%'+8'4

1.Slide the receiver's battery compartment door in the direction of the arrow to remove it.

2.Slide the switch inside the battery compartment to select the same

channel for the receiver as is selected for the transmitter. ±

3.Install three C batteries as indicated by the polarity symbols (+ and –) marked inside.

4.Replace the compartment door. If the receiver's LED flashes with a short beep tone, replace its batteries.

12'4#6+10

Slide ON/OFF on the receiver to ON. Press and hold down BELL on the transmitter. Transmit begins, the indicator lights, and the receiver sounds the door chime twice. ±

75+0)"6*'"%*+/'"#5"#0" '064;"%*+/'

1.Connect the transmitter to a normally open alarm sensor. You need 2- conductor wire (not supplied) to make this connection.

2.Split the ends of the wire, then connect the wire from the sensor's switch to the screw holes on the back of the transmitter, using the two supplied machine screws. If the sensor you are using has both normally open and normally closed contacts, be sure to connect to the sensor's normally open contacts.

3.Slide ON/OFF on the receiver to ON.

6*'"(%%"9#065";17" 61"-019

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Consult your local RadioShack store or an experienced radio/TV technician for help.

If you cannot eliminate the interference, the FCC requires that you stop using your door chime.

Changes or modifications not expressly approved by RadioShack may cause interference and void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

52'%+(+%#6+105

Frequency

433.92 MHz ± 600KHz

Transmitter current consumption

<10mA

Receiver current consumption...<2mA @ standby

<130mA @ sound playing Receiver battery low.......................... 2.4V ± 0.1V

Receiver audio power............... > 80dBA @ 25cm Transmitter operating

temperature

..................................–20°C to 60°C

 

(–4°F to 140°F)

Specifications are typical; individual units might vary. Specifications are subject to change without notice.

Limited One-Year Warranty

This product is warranted by RadioShack against manufactur- ing defects in material and workmanship under normal use for one (1) year from the date of purchase from RadioShack com- pany-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack

MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIM- ITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PER- SON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM IN- CONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVE- NUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or con- sequential damages, so the above limitations or exclusions may not apply to you.

In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of pur- chase date to any RadioShack store. RadioShack will, at its op- tion, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and prod- ucts on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or re- placed parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or re- placement of the product made after the expiration of the war- ranty period.

This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, im- proper or abnormal usage, failure to follow instructions, im- proper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facil- ity; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

RadioShack Customer Relations, 200 Taylor Street, 6th Floor,

Fort Worth, TX 76102

12/99

 

63-1123

RadioShack Corporation

AO0113AAA1

07A02

Fort Worth, Texas 76102

Printed in China

Page 2
Image 2
Radio Shack 63-1123 owner manual 124#6+10, #06517, 52%++%#6+105, +06*4%+84, 75+06*%*+/#5#0 064%*+

63-1123 specifications

The Radio Shack 63-1123, often regarded as a classic in the realm of electronics, is an indispensable piece of equipment for hobbyists and professionals alike. This multimeter, with its impressive range of features and capabilities, has made it a preferred choice for those seeking accuracy and reliability in their measurements.

One of the standout features of the Radio Shack 63-1123 is its digital display, which allows users to easily read and interpret measurements. The clear LCD screen shows readings in a straightforward manner, minimizing the chances of misinterpretation. The device is designed to measure various electrical parameters, including voltage, current, and resistance. Its versatility makes it suitable for applications ranging from household repairs to more sophisticated electronics projects.

The 63-1123 employs advanced technology that ensures precise measurements. It is equipped with both auto-range and manual range settings, giving users the flexibility to choose the most appropriate mode for their specific measurements. The auto-ranging function automatically selects the optimal range for the test, saving time and reducing complexity, especially for beginners in the field of electronics.

In terms of safety features, the Radio Shack 63-1123 is designed with user protection in mind. It includes fuse protection for current measurements, thereby preventing damage to both the device and the user during high-current tests. Additionally, the device has been built to comply with the necessary safety standards, making it a reliable option for both novice and experienced users.

The compact and lightweight design of the 63-1123 ensures portability, making it easily transportable for on-site measurements. This feature is particularly useful for technicians and engineers who may need to use a multimeter in various locations or work environments. The device is powered by standard batteries, adding to its convenience and ease of use.

Another characteristic worth noting is the durability of the Radio Shack 63-1123. Its sturdy build quality means it can withstand typical wear and tear associated with regular use in workshop or field settings. Overall, the Radio Shack 63-1123 stands out in the crowded multimeter market with its combination of functionality, safety, and ease of use, making it a reliable choice for anyone involved in electrical measurements.