![](/images/new-backgrounds/1200838/20083831x1.webp)
Note: If you normally press ENTER after entering a channel number, you must also include ENTER in your sequence.
4.To store the sequence, press and hold down SET UP until the red indicator light blinks twice.
Whenever you press the selected sequence key (AU- DIO SEQ or VIDEO SEQ), your system’s remote control sends the sequence of commands you entered.
To erase a sequence, press the device key, then hold SET UP until the red indicator light blinks twice. Then press 9 9 5 and the key to which the sequence is as- signed (AUDIO SEQ or VIDEO SEQ). Press SET UP until the red indicator blinks twice again. The sequence is erased.
Punch-Through
The
The 6 in 1 RF Remote Control System’s remote control keys are not all used by every device. For example, a TV is often the only device that uses VOLUME. When you press TV, then press VCR, the functions of any keys not used by the VCR retain their TV functions. If your cable box or VCR has a volume control, you can turn off the
For example, to turn off
To turn on
93 TV. When the indicator blinks twice a second time, the
Need help? Call 1-800-950-7044!
16