Radio Shack 900MHz Remote Commands

27Remote Operation

• When the phone is operating from a remote location, it stops all answering func-

tions and rC appears on the display on the base. The phone resumes answering

functions when it is no longer in remote operation, if you have not turned it off.

• The remote playback of incoming messages is limited to 4 minutes. If you have

more messages after 4 minutes have passed, you must press # 2 again to listen

to the rest of the messages.

• When using remote operation, you can only delete the current message during

playback. You cannot delete all the messages stored at one time.

The following table shows the remote commands you can use.

Note: Remote operation stops when someone picks up the handset and presses ei-

ther LINE 1 or LINE 2 (whichever is flashing), or any phone on the same phone line.

Remote Commands

Press #

then (within

2 seconds: Function

1Repeat current message during playback.

2Play messages.

3Skip current message during playback.

4Delete current message during playback.

5Stop playback, recording, and room monitoring.

6Set the phone to answer or not answer calls.

7Record or stop recording a new outgoing message.

8Play the outgoing message.

9Switch to the other line (Line 1 or Line 2).

0Monitor the room where the phone is located for 15 seconds.

Contents

Main ! ! Contents Page Features TELEPHONE FEATURES TAD FEATURES READ THIS BEFORE INSTALLATION FCC Rules IMPORTANT SAFETY INSTRUCTIONS Page SAVE THESE INSTRUCTIONS 10 A Quick Look At Your Telephone A Quick Look At Your Telephone Installation MOUNTING THE PHONE Connecting to Phone Lines On a Desk Top On a Wall Plate or a Wall To mount the phone on a wall plate To mount the phone directly on a wall CONNECTING AND CHARGING THE BATTERY PACK SETTING THE DIALING MODE ADJUSTING THE RINGER On the Handset On the Base SETTING THE NUMBER OF RINGS Basic Operation MAKING A CALL ANSWERING A CALL SETTING THE HANDSET ADJUSTING THE SPEAKERPHONE USING MUTE USING HOLD SWITCHING BETWEEN THE HANDSET AND USING BOTH THE HANDSET AND MAKING A CONFERENCE CALL 3-Way Conferencing USING THE PHONE WITH EXTENSION PHONES USING REDIAL USING FLASH USING TONE SERVICES ON A PULSE LINE USING THE PAGING/ INTERCOM FEATURES USING A HEADSET Memory Operation STORING A NUMBER IN MEMORY Entering a Pause DIALING A MEMORY NUMBER Chain-Dialing Service Numbers Testing Stored Emergency Numbers TAD Operation SELECTING THE OUTGOING MESSAGE RECORDING/DELETING AN OUTGOING MESSAGE SETTING THE RECORD TIME SETTING THE PHONE TO ANSWER CALLS SCREENING CALLS RECORDING INCOMING MESSAGES RECORDING A MEMO RECORDING A CONVERSATION PLAYING MESSAGES ADJUSTING THE TADS 88 8 or 9 99 9 DELETING MESSAGES Remote Operation USING THE TOLL-SAVER USING REMOTE COMMANDS Remote Commands 28 Troubleshooting Troubleshooting Care REPLACING THE BATTERY PACK THE FCC WANTS YOU TO KNOW LIGHTNING 43-681 UCZZ01266BZ 09A00 Printed in China RadioShack A Division of Tandy Corporation Fort Worth, Texas 76102 Limited One-Year Warranty We Service What We Sell