Radio Shack CD-8150 owner manual Selecting A Cd, Selecting A Track, illustration

42-5071.fm Page 12 Thursday, August 12, 1999 10:45 AM

SELECTING A CD

To select a CD, press that DISC NO. (1–5) button on the remote control, then press PLAY . The selected CD plays from Track 1.

illustration

To select the CD in the next higher- numbered disc holder, press DISC SKIP. The CD changer moves to the next higher-numbered disc holder and begins to play that CD.

Note: You cannot use DISC SKIP or DISC NO. during programmed play (see “Playing a Sequence of Tracks” on Page 16).

12

SELECTING A TRACK

illustration

You can select a track in two ways. You can enter the track number using the remote control’s TRACK NO. but- tons. Then press PLAY .

Notes:

•If you enter a track number higher than the highest track number on a CD, the CD changer starts to play the last track on that CD.

•You cannot use TRACK NO. during programmed play (see “Playing a Sequence of Tracks” on Page 16).

You can also select a particular track

with the and buttons.

While a CD is playing, press once to return to the beginning of the cur-

rent track. Press to skip other tracks on the same CD.