RADIO OPERATION
TUNING THE RADIO
1.Set the volume to its lowest set- ting, and lift up and extend the antenna.
2.Set ON/OFF to ON to turn on the radio. The last frequency tuned is automatically selected and displayed.
3.Slide FM/AM/SW1/SW2 to the desired band.
4.Set SENS to DX or LOC.
•DX — to receive weak signals
•LOC — to receive strong (local) signals
Note: SENS only functions for FM and shortwave reception.
5.Press TUNING or to tune to the desired station.
Note: To automatically tune the radio to the next strong signal,
press and hold TUNING or
for about 2 seconds.
6.Adjust the volume to a comfort- able level.
7.Set the tone switch to HI or LO.
•HI — to enhance music
•LO — to enhance speech
•FM — to receive signals in the 87.5 to 107.9 MHz range
•AM — to receive signals in the 530 to 1710 KHz range
•SW1 — to receive signals in the 3.20 to 7.30 MHz range
•SW2 — to receive signals in the 9.50 to 21.75 MHz range
8.Set ON/OFF to OFF to turn off the radio.
7