JBL CVPD50, CVR700 manual CTone Mode/Color/List Button, Holding the Tuning Up/Down Buttons

27 29

AAudio Input Selector: Press this button to select one of the digital audio inputs 9)cdefhijk for use with its source or to select the analog audio input for that source. It is not possi- ble to reassign a digital audio input to another source. See page 60 for more information on using digital inputs.

BDirect/Brightness/Window Button: Press this button when the tuner is in use to directly enter a station’s fre- quency, or when a CD is in use to directly enter a track number. After pressing this button, press the appropriate Alpha- numeric Keys lto select a station or track.

When the Screen mode is active, press this button to adjust the brightness of the CVPD50. Use the ‹/›Navigation Controls q 6 to increase or decrease the brightness setting.

See page 55 for more information on screen adjustments. This button also activates the Window function for TiVo players. See your TiVo owner’s manual for more information on the Window function.

CTone Mode/Color/List Button:

This button controls the tone settings, enabling adjustment of the bass and tre- ble boost or cut. You may also use it to disable the tone controls, for a “flat” response. The first press of the button displays a TONE IN message in the Lower Display Line Eand on-screen display. To disable the controls, press the ⁄/¤ Navigation Controls Guntil the display reads TONE OUT. To change the bass or treble settings, press this button again until the desired control appears in the Lower Display Line E and in the on-screen display, and then press the ⁄/¤ Navigation Controls Guntil the desired setting appears.

When the Screen mode is active, press this button to adjust the color tempera- ture of the CVPD50 display. See page 55 for more information on screen adjust- ments. This button also activates the List function for TiVo players. See your TiVo owner’s manual for more information on the List function.

DOSD/Contrast Button: Press this button when the System mode is active to access the setup menu for the CVR700’s audio functions. When the Screen mode is active, press this button to adjust the contrast of the CVPD50 dis- play. See page 55 for more information on screen adjustments.

EAngle/Tuning Mode Button: When the DVD mode is active, press this button so select an alternate camera angle, if available on the current DVD.

When the tuner is in use, press this but- ton to change the tuner scan mode between manual and automatic. When the button is pressed so that TUNE AUTO appears in the Lower Display Line E, only stations with acceptable signal quality will be tuned when scan- ning, and the tuner will play FM stations in stereo, when available. In the Auto mode, when the Tuning Up/Down Buttons 8Lf 27 29 are pressed and held, the unit will automatically search for the next available station with good signal strength. When the Tuning Mode Button ois pressed so that TUNE MANUAL appears in the Lower Display Line E, pressing and

holding the Tuning Up/Down Buttons

8Lf 27 29 will cause the tuner to scan up or down through the frequencies and stop when the button is released, even if that frequency does not provide an acceptable signal. In either TUNE AUTO or TUNE MANUAL mode, each tap of the Tuning Up/Down Buttons 8Lf will cause the tuner to step through the frequencies in single-step increments.

When the FM band is in use, pressing the button so that the TUNE MANUAL mode is activated will enable you to tune stations with weak signals by changing to monaural reception. See page 64 for more information on tuner operation.

FLevel/Guide Button: This button is used to start the process of setting the CVR700’s output levels to an external source, such as a favorite DVD. While the source is playing, press this button, and then press the ⁄/¤ Navigation Controls Guntil the channel to adjust appears. Press the Set Button Ito select that channel, and then use the ⁄/¤ Navigation Controls Gagain to adjust the level setting. See page 64 for more information.

G⁄/¤/‹/›Navigation Disc: This single disc-like button is used to nav- igate the on-screen configuration menus, to scroll through options lists and to select various settings such as delay, speaker configurations, surround modes, digital inputs, etc. To use the button, sim- ply press it left, right, up or down in the direction indicated by the ⁄/¤/‹/› icons printed on the disc.

HExit/Cancel Button: When pro- gramming the remote, press this button to cancel the current function and return to the previous remote function. When using the remote to enter frequencies for direct tuner access or track numbers for direct access on a CD, press this button to clear previous entries.

ISet Button: This button is used to enter settings into the CVR700’s memory, or to confirm a selection while setting delay distances, speaker configuration and output level adjustments. It is used as the Enter or OK button for most other devices.

JPreset/Page Down/Reverse Skip

Button: This multipurpose button has a different function depending on the source in use.

When used with the tuner, this button scrolls through the preprogrammed sta- tion presets.

When used with optical sources, such as the internal disc changer or an external CD player, press this button once to return to the beginning of the current track, and again quickly to go to the beginning of the previous track.

The Page Down function is used with cable and satellite television to page quickly through on-screen menus.

When a disc containing JPEG still images is being played using the internal changer, press this button to scroll to the previous image.

KVolume Up/Down Controls: To raise the volume, press towards the top of the disc, where it is marked ⁄ Vol, and to lower the volume, press towards the bottom of the disc, where it is marked

¤Vol. The left and right arrows on this disc have different functions, depending on the source in use. See Channel/Slow Play Up/Down Control gbelow for more information.

LTuning Down/Reverse Search

Button: This button has different func- tions depending on whether the tuner or another source is in use.

Press this button when the tuner is in use to change the station to one with a lower frequency. Each tap of this button will decrease the frequency by one increment. When the tuner receives a strong enough signal for adequate reception, MANUAL TUNED will appear in the Lower Display Line E. When the tuner is in the Auto/Stereo mode, press and hold the button to cause the tuner to scan for the

26