JBL CVR700, CVPD50 Throughout this manual, you will, 8Logic 7 Mode/Sports Preset

2 10 33 34

CVR700R2 REMOTE CONTROL FUNCTIONS

IMPORTANT NOTE: The JBL Cinema Vision remotes are powerful devices capable of controlling virtually your entire home cinema system. In comparison to a traditional system of the same capabili- ties, these remotes can replace up to 10 separate remote controls and therefore end the confusion and clutter associated with having a different remote for each of your system components. In order to achieve this goal, the JBL Cinema Vision remotes are designed to assume the duties of controlling different devices within your system by first pressing one of the 10 Selector Buttons dfg

. Pressing one of these buttons places your remote control in a different “page”, where the remote but- tons are assigned control functions avail- able for that specific purpose. For exam- ple, all internal DVD changer functions are accessed by pressing the DVD Button d 2 first, and all CVPD50 Plasma Display functions are accessed by pressing the Screen Button e 34 first, and all overall audio and system commands for the CVR700 are accessed by first pressing the System Button f

33. Throughout this manual, you will

see references to the system being active in DVD, SYSTEM, SCREEN, CABLE/SAT, or other modes. This means that one of these 10 keys is to be pressed first to place your remote in the prescribed mode before accessing any specific controls. It is important to always remember to press the appropriate page selection button before trying to access any specific func- tions for a system or source. This may take a little bit of discipline and practice at first, but it should become second nature in a very short time.

NOTES:

•The function names shown here are each button’s function when used with the CVR700 (System), its internal DVD changer (DVD/Main) and the CVPD50 (Screen). Most buttons have additional functions when used with other devices, and some of these functions may be assigned to different buttons, depending on which device was select- ed. The device name will appear in the upper line of the LCD Information Display 2and the function assigned to that device will appear in the lower line when the button is pressed. See pages 89 through 91 for a list of the functions assigned to each button for each device type.

•Some buttons have special functions when they are pressed and held for 3 seconds.

•The jack on the upper right side of the remote is reserved for future use. Do not remove the plug provided or con- nect any device to the jack.

•To make it easier to follow the instruc- tions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at www.jbl.com.

•The JBL Cinema Vision main remote control may be programmed to control up to eight devices, including the CVR700 receiver with disc changer and the CVPD50 screen. Before using the remote, it is important to press the Input Selector 3that corresponds to the device you wish to operate.

•The remote is capable of operating a wide variety of products made by other manufacturers using control codes that are programmed into the remote’s code library. As described on pages 76–78, it is simple to program the remote to operate your device by selecting the device type and brand, and then pro- gramming the correct set of codes for that brand.

0Power Off (All): Press this button to place the CVR700 (and the CVPD50) or a selected device in the Standby mode.

Press and hold this button to place all devices, including the CVR700, the CVPD50 and any other products whose codes you have programmed into the remote, into the Standby mode.

1Power On (All): Press this button to power on the CVR700 (and CVPD50) or another device you selected by first press- ing the appropriate Input Selector 3.

Press and hold this button to power on all devices, including the CVR700, the CVPD50 and any other products whose codes you have programmed into the remote.

2LCD Information Display: This two-line screen displays various informa- tion depending on the commands that have been entered into the remote. Normally, the upper line will display the current device (e.g., DVD/MAIN), and the lower line will display the name of the function key when pressed (e.g., DISC SKIP). See page 85 for informa- tion on renaming devices and keys.

3Input Selectors: Pressing one of these buttons will perform two actions. The CVR700 will switch to the source selected, and the remote will switch to the control codes for the selected source. In order to control the CVR700 again, press the System Selector 5, and to control the CVPD50 screen, press the Screen Selector 4.

Press and hold any of these buttons to power on the CVR700, the CVPD50 and the source device, and to begin play of the source device.

4Screen Selector: Press this button to select the control codes for the CVPD50 screen.

5System Selector: Press this button to select the control codes for the CVR700.

6DSP Surround Mode Selector: In System mode, press this button to select one of the DSP audio surround modes, such as Hall 1, Hall 2 or Theater. Each press of the button selects another mode. See page 62 for descriptions of the vari- ous surround modes.

7Test Tone Button: Press this button to activate the CVR700’s test tone that is used to calibrate speaker output levels.

See pages 50–51 for more information on calibrating speaker output levels.

8Logic 7 Mode/Sports Preset

Button: When the System Selector 5is active, press this button to select from among the available Logic 7 sur- round modes. (See page 62 for descrip- tions of the various surround modes.) When the Screen Selector 4is active, press this button to select the CVPD50 picture settings that were preset at the factory for optimal viewing of sporting events.

NOTE: The Sports/Broadcast/ Movies Buttons imn 3 optimize picture settings for a specific viewing medium.

The Broadcast settings are the most neu- tral, balanced and accurate, and are opti- mized for clarity. The Movies settings are softer and less bright. The Sports settings are more vibrant and optimized for fast- moving action.

9SPL Select Button: This button activates the EzSet function to quickly and accurately calibrate the speaker out- put levels. The EzSet remote also has a manual SPL meter function to assist with manual setting of the output levels, or trimming the settings to an external source. See page 51 for more information on EzSet.

25