JBL CVR700, CVPD50 manual Level/DVD Setup/Guide Button, Set Button, Controls

2 10 33 34

IMPORTANT NOTE: The JBL Cinema Vision remotes are powerful devices capable of controlling virtually your entire home cinema system. In comparison to a traditional system of the same capabili- ties, these remotes can replace up to 10 separate remote controls and therefore end the confusion and clutter associated with having a different remote for each of your system components. In order to achieve this goal, the JBL Cinema Vision remotes are designed to assume the duties of controlling different devices within your system by first pressing one of the 10 Selector Buttons dfg

. Pressing one of these buttons places your remote control in a different “page”, where the remote but- tons are assigned control functions avail- able for that specific purpose. For exam- ple, all internal DVD changer functions are accessed by pressing the DVD Button d 2 first, and all CVPD50 Plasma Display functions are accessed by pressing the Screen Button e 34 first, and all overall audio and system commands for the CVR700 are accessed by first pressing the System Button f 33 . Throughout this manual, you will see references to the system being active in DVD, SYSTEM, SCREEN, CABLE/ SAT, or other modes. This means that one of these 10 keys is to be pressed first to place your remote in the prescribed mode before accessing any specific controls. It is important to always remember to press the appropriate page selection key before trying to access any specific functions for a system or source. This may take a little bit of discipline and practice at first, but it should become second nature in a very short time.

Each function on the CVR700R1 remote has the same effect on the CVR700, CVPD50 and other devices as described earlier for the CVR700R2 remote control functions; however, functions may be combined on different keys. Each key has an independent function depending on the device currently in use. Be careful to press the input selector, or the System or Screen mode selector, corresponding to the device you wish to control prior to pressing a button to be sure that your button press will operate the desired function. Refer to the function list on pages 96 through 97 for information on which function is assigned to a given key for a given device.

1Power On (All): Press this button to power on the CVR700, the CVPD50 or

another device you selected by first pressing the appropriate Input Selector

2 10 .

Press and hold this button to place all devices, including the CVR700, the CVPD50 and any other products whose codes you have programmed into the remote, into the Standby mode.

2DVD/Tuner/Auxiliary/VCR/CBL/ SAT Input Selectors: Pressing one of these buttons will perform two actions. First, the CVR700 will switch to the source selected. Then, the remote will switch to the control codes for the selected source. In order to control the CVR700 again, press the System Selector 33 , and to control the CVPD50 screen, press the Screen Selector 34 .

Press and hold any of these buttons to power on the CVR700, the CVPD50 and the source device, and to begin play of the source device.

3Sports, Broadcast and Movies Preset Selectors: When the Screen Selector 33 is active, press any of these buttons to select the CVPD50 pic- ture settings that were preset at the fac- tory for optimum viewing of sporting events, broadcast television programs or movies.

NOTE: The Sports/Broadcast/ Movies Buttons imn 3 optimize picture settings for a specific viewing medium.

The Broadcast settings are the most neu- tral, balanced and accurate, and are opti- mized for clarity. The Movies settings are softer and less bright. The Sports settings are more vibrant and optimized for fast- moving action.

4⁄/¤ Navigation Buttons: These buttons are used to navigate the on- screen configuration menus, to scroll through options lists and to select various settings such as delay, speaker configura- tions, surround modes, digital inputs, etc.

5Level/DVD Setup/Guide Button:

This button is used to start the process of setting the CVR700’s output levels to an external source, such as a favorite DVD. While the source is playing, press this button, and then press the ⁄/¤

Navigation Controls 4 until the channel to adjust appears. Press the

Set Button	7 to select that channel,
and then use the ⁄/¤ Navigation
Controls 4	again to adjust the

level setting. See page 64 for more information.

In DVD mode, this button accesses the DVD setup menu described on page 53, and enables you to configure the DVD changer.

6‹/› Navigation Buttons: These buttons are used to navigate the on- screen configuration menus, to scroll through options lists and to select various settings such as delay, speaker configura- tions, surround modes, digital inputs, etc.

7Set Button: This button is used to enter settings into the CVR700’s memory, or to confirm a selection while setting delay times, speaker configuration and output level adjustments. It is used as the Enter or OK button for most other devices.

8Exit/Cancel Button: When pro- gramming the remote, press this button to cancel the current function and return to the previous remote function. When using the remote to enter frequencies for direct tuner access or track numbers for direct access on a CD, press this button to clear previous entries.

9Direct/Brightness/Window Button: Press this button when the tuner is in use to directly enter a station’s frequency, or when a CD is in use to directly enter a track number. After press- ing this button, press the appropriate

Alphanumeric Keys lto select a station or track.

When the Screen mode is active, press this button to adjust the brightness of the CVPD50. See page 55 for more informa- tion on screen adjustments. This button also activates the Window function for TiVo players. See your TiVo owner’s man- ual for more information on the Window function.

NOTE: The Sports/Broadcast/ Movies Buttons imn 3 optimize picture settings for a specific viewing medium.

The Broadcast settings are the most neu- tral, balanced and accurate, and are opti- mized for clarity. The Movies settings are softer and less bright. The Sports settings are more vibrant and optimized for fast- moving action.

10Game/Digital Recorder/ Computer Input Selectors: Pressing one of these buttons will perform two actions. First, the CVR700 will switch to the source selected. Then, the remote will switch to the control codes for the selected source. In order to control the CVR700 again, press the System

Selector 33 , and to control the

33