JBL CVPD50 Programming Product Codes, Programming the CVR700R2 Remote, Preprogrammed Code Entry

PROGRAMMING THE CVR700R2 REMOTE

The CVR700R2 remote is factory-pro- grammed for all functions needed to operate the unit. In addition, it is also preprogrammed to operate most recent JBL DVD players and changers, CD play- ers and changers, CD recorders and cas- sette decks. The codes for other brand devices may be programmed into the CVR700R2 remote using its extensive library of remote codes or a head-to-head learning process for codes not in the internal library.

Important Notes on Using the CVR700R2 Remote: The CVR700R2 remote control is capable of operating up to nine devices, including the CVR700. In order to segregate the control com- mands for each device, the remote’s logic contains a separate “page” of commands for each device that is called up when that device’s selector has been pressed. For example, in order to access the commands that control the CVPD50 screen, such as Letterbox or PIP, you must first press the Screen Selector e, so that the word SCREEN appears in the upper line of the LCD Information Display c.

Most of the programming functions in this section begin by using the remote control’s own menu system, which is accessed by pressing and holding the Remote Menu Button buntil the Main Menu appears. In order to access this function, you must first press the System Selector f.

Programming Product Codes

Thanks to the remote’s advanced technol- ogy and two-line LCD display, it is no longer necessary to look up cumbersome codes when programming the remote; fol- lowing the steps outlined below, you sim- ply search for the brand name from the remote’s memory. We recommend that you first try the preprogrammed code entry method. If that procedure is not successful, then try the code-learning method.

	Preprogrammed Code Entry
	The easiest way to program the remote
	for operation with a source device from
	another brand is to follow these steps:
	1. Turn on the power to the device you
	wish to program into the remote. This
	is important, as in a later step you will
	need to see whether the device turns
	off to determine whether the remote
	has been programmed for the proper
	remote codes. In order to program
76	codes for a game console or cam-

corder, which do not have remote- controlled power on/off codes, you must insert a disc or tape and begin play.

2.Press and hold the Remote Menu Button bfor about 3 seconds while the message shown in Figure 54 appears in the remote’s LCD Information Display c. Release the button when the red light under the Set Button sappears.

H O L D B U T T O N

F O R 3 S E C O N D S

Figure 54

3.The remote’s MAIN MENU message (Figure 55), will appear in the LCD display and the Set Button swill remain illuminated in red. Press the Set Button sto begin the process of selecting a device and locating the proper remote codes.

M A I N M E N U

P R O G R A M C O D E

Figure 55

4.PROGRAM CODE will appear in the LCD display (Figure 56). Press the ⁄/ ¤ Navigation Button qto scroll through the list of source inputs and press the Set Button qwhen the source you wish to set the codes for appears. For this example, we will select “AUX” to enter the codes needed to operate your HDTV tuner. As a shortcut, once the screen shown in Figure 56 appears, you may jump to the desired source by pressing its

Input Selector d.

P R O G R A M C O D E

A U X

Figure 56

NOTE: Each source may be programmed with certain device types:

•AUX: Used to program a TV, HDTV tuner, VCR, TV/VCR combination device, exter- nal DVD or CD player, cable box or satel- lite receiver.

•VCR: Used to program a videocassette recorder or TV/VCR combination device.

•CBL/SAT: Used to program a cable tele- vision box, satellite television receiver or HDTV tuner.

•GAME/CAM: Used to program a video game console or camcorder.

•DR: Used to program a digital recorder, such as a DVD recorder, CD recorder, D-VHS recorder, TiVo, or personal video device (digital video recorder) containing a hard disc drive.

•DVI/COMPUTER: Used to program an external device equipped with a digital video interface (DVI) video output, such as an external DVD player, cable televi- sion box, satellite television receiver or HDTV tuner.

5.SELECT A DEVICE will appear in the LCD display (Figure 57). Press the ⁄/¤ Navigation Controls qto scroll through the list of device types available for the source you have selected, and press the Set Button swhen the device you wish to set the codes for appears. For this exam- ple, we will select “HDTV-Tuner” to enter the codes needed to operate your HDTV set-top tuner.

S E L E C T A D E V I C E

H D T V - T U N E R

Figure 57

If you make a mistake at any time, press the Exit/Cancel Button rto return to the previous menu screen, or press the Remote Menu Button bto exit the remote menu system.

6.At the next menu screen on the remote (Figure 58), press the Set Button sto enter the Manual mode, which means that you will select the brand name of the device from the list programmed into the remote’s memory.

P R O G R A M C O D E

M A N U A L

Figure 58

7.The next menu screen on the remote (Figure 59) will show the start of the list of available brands. Press the ⁄/ ¤ Navigation Buttons quntil the brand name of the device you are programming into the remote appears on the lower line of the display and then press the Set Button s. As a shortcut, once the screen shown in Figure 57 appears, you may jump to the first letter of the desired brand name by pressing the corresponding

Alphanumeric Key lrepeatedly until the brands beginning with the desired letter appear. For example, to jump to the brand “RCA”, simply press the “7” key three times, until the first brand beginning with an “R” appears, and then scroll to the desired name.

S E L E C T A B R A N D

R C A

Figure 59