JBL CVPD50, CVR700 manual Component Video Monitor Output · to the display, Picture-in-Picture PIP

22

›Composite and S-Video Monitor Outputs: If you are not using the CVPD50, or if you desire a secondary dis- play, connect thse jacks to the composite or S-video input of a TV monitor or video projector to view the output of any stan- dard video source selected by the receiv- er’s video switcher. If both standard com- posite and S-video sources are used, you must make connections from both Video Monitor Output jacks to your display. Also, if component video sources are used, you must also connect the

Component Video Monitor Output · to the display.

NOTE: The CVR700 is optimized to be used with the CVPD50 High-Definition Plasma Display. Composite, S-video and component video monitor outputs on the CVR700 are provided as a means of con- necting an auxiliary display only. On- screen status messages, and all digital video post-processing – including scaling, de-interlacing, and upconversion features of the CVR700 – are only available when used with CVPD50.

fiRemote IR Output: This connection permits the IR sensor in the receiver to serve other remote controlled devices.

Connect this jack to the “IR IN” jack on JBL (or other compatible) equipment.

flRemote IR Input: If the CVR700’s front-panel IR sensor is blocked due to cab- inet doors or other obstructions, an exter- nal IR sensor may be used. Connect the output of the sensor to this jack.

NOTE: The remote IR input and output on the CVR700 are only used for non-video functions, and will have no effect on the CVPD50 plasma display. JBL recommends that you point the remote control at the LED light on the front of the CVPD50 dis- play for all functions, as the CVPD50 will pass any non-video command codes to the CVR700.

‡Component Video Digital Recorder Inputs: These inputs may be used with any video source device equipped with analog Y/Pr/Pb component video outputs. These jacks are perma- nently linked to the Digital Recorder Source input.

° Component Video Cable/Satellite Inputs: These inputs may be used with any video source device equipped with analog Y/Pr/Pb component video out- puts. These jacks are permanently linked to the Cable/Satellite source input.

·Component Video Monitor Outputs: If you are not using the CVPD50, or if you desire a secondary video display, connect these outputs to the component video inputs of a video projector or monitor. When a source con- nected to one of the Component Video Inputs ‡° is selected, the signal will be sent to these jacks.

NOTE: The CVR700 is optimized to be used with the CVPD50 High-Definition Plasma Display. Composite, S-video and component video monitor outputs on the CVR700 are provided as a means of con- necting an auxiliary display only. On- screen status messages, and all digital video post-processing – including scaling, de-interlacing, and upconversion features of the CVR700 – are only available when used with CVPD50.

a Picture-in-Picture (PIP)

Composite Video Input: Connect the composite video output of a video device that you would like to have available for picture-in-picture (PIP) viewing using the JBL Cinema Vision CVPD50 screen. When the PIP function is activated, the signal fed to this jack will appear within a small field over the main program visible on the plasma screen. Except for the DVI/ Computer source, the PIP view may also be available as a split screen. Use the Screen menu system to configure the PIP view. When the main source is HD com- ponent video (480p or better), the PIP function is not available.

The PIP source must be able to output composite video simultaneously with its main method of connection to the CVR700. If the PIP device is connected via its composite video output to a source input on the CVR700, a Y-Cable will be required to connect to both the main source input jack and the PIP input.

b Coaxial Digital Audio Output:

Connect this jack to the coaxial digital input of a DVD+R/RW, DVD-R/RW, CD- R/RW, MiniDisc or other compatible digital recorder.

c Auxiliary Coaxial Digital Audio

Input: Connect the coax digital output from a DVD player, HDTV receiver, the S/P-DIF output of a compatible computer sound card playing audio files or streams, LD player or CD player to this jack. The signal may be a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD player to this jack. This input is

permanently assigned to the Auxiliary source input.

d Cable/Satellite Coaxial Digital

Audio Input: Connect the coaxial digital audio output from a DVD player, HDTV receiver, the S/P-DIF output of a compati- ble computer sound card playing audio files or streams, LD player or CD player to this jack. The signal may be a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD player to this jack. This input is permanently assigned to the Cable/Satellite source input.

e DVI/Computer Coaxial Digital

Audio Input: Connect the coaxial digital audio output from a DVD player, HDTV receiver, the S/P-DIF output of a compati- ble computer sound card playing audio files or streams, LD player or CD player to this jack. The signal may be a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD player to this jack. This input is permanently assigned to the DVI/Computer source input.

f Digital Recorder Coaxial Digital

Audio Input: Connect the coaxial digital audio output from a DVD player, HDTV receiver, the S/P-DIF output of a compati- ble computer sound card playing audio files or streams, LD player or CD player to this jack. The signal may be a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD player to this jack. This input is permanently assigned to the Digital Recorder source input.

g Optical Digital Audio Output:

Connect this jack to the optical digital input connector on a DVD+R/RW, DVD- R/RW, CD-R/RW, MiniDisc or other com- patible digital recorder.

h Auxiliary Optical Digital Audio

Inputs: Connect the optical digital output from a DVD player, HDTV receiver, the S/P-DIF output of a compatible computer sound card playing audio files or streams, LD player or CD player to these jacks. The signal may be a Dolby Digital signal, a DTS signal or standard PCM digital source. This input is permanently assigned to the Auxiliary source input.

i Cable/Satellite Optical Digital

Audio Input: Connect the optical digital audio output from a DVD player, HDTV receiver, the S/P-DIF output of a compati- ble computer sound card playing audio files or streams, LD player or CD player