Moving the Unit
Before moving any of the units, be certain to disconnect any interconnection cords with other components, and make certain that you disconnect the unit from the AC outlet.
Important Note for CVPD50 Plasma
Display: Always make sure that two people lift the CVPD50 plasma display
together. Never attempt to lift the unit by
yourself. Failure to follow this instruc- tion may result in personal injury or irreparable damage to the unit that is not covered under warranty.
IMPORTANT NOTE: To avoid damage to the CVR700 that may not be covered by the warranty, be certain that all discs are removed from the unit before it is tilted in place or moved. Once the CVR700 is installed, a disc may be left in the unit when it is turned off, but the unit should NEVER be tilted or moved with a disc left in the changer. Failure to do so may result in discs becoming dis- lodged and jamming the mechanism which will require that the unit be returned to an authorized service facility for repair.
Important Information for the User
The CVR700 and CVPD50 have been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of FCC Regulations 47. Operation is subject to the following conditions: (1) These devices may not cause harmful interfer- ence, and (2) these devices must accept interference received, including interfer- ence that may cause undesired operation. These limits are designed to provide rea- sonable protection against harmful inter- ference in a residential installation. This equipment generates, uses and can radiate
■Reorient or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
■Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications may cause these units to fail to comply with Part 15 of the FCC Rules and may void the user’s authority to operate the equipment.
CAUTION: The CVR700 uses a laser sys- tem. To prevent direct exposure to the laser beam, do not open the cabinet enclosure or defeat any of the safety mechanisms provided for your protection.
DO NOT STARE INTO THE LASER BEAM. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future use. Should the unit require maintenance or repair, please contact your local JBL service center. Refer servicing to qualified personnel only.
The following is important safety infor- mation that you should read carefully in order to prevent the possibility of person- al injury to yourself or others, or damage to the equipment. Errors in installation or connection may lead to damage to the CVPD50, the CVR700 or other devices in your system.
Never allow children to use the CVPD50, CVR700 or any other electrical appliances without supervision. Take care to install these devices where they are safe from children and pets.
Never operate the CVPD50 plasma dis- play in environmental conditions other than those listed in the technical specifi- cations on pages
Protect the CVPD50 plasma display and the CVR700 from moisture, including high levels of humidity, proximity to standing water, dripping water, spray water and rain. Do not install this equipment out- doors, near a hot tub or in a bathroom. Do not put any vessels that are filled with water, such as vases, on the unit. If you connect an external antenna to any device connected to the CVR700, ensure that no water can penetrate the cable.
Protect this equipment from heat, heat accumulation and direct sunlight. Avoid placing the unit near fire, heat sources or ovens. Maintain sufficient space on all sides of the unit for proper ventilation. Do not drape curtains over the unit. Do not mount the unit in an enclosed cabinet or wall.
Failure to follow these instructions may lead to personal injury or death due to electric shock and/or fire caused by overheating, and/or irreparable damage to the unit that is not covered under warranty.
8
