Radio Shack ET-1104 owner manual Operation, Making and Receiving Calls, Setting the Handset Volume

43-1104.fm Page 13 Wednesday, August 18, 1999 8:05 AM

OPERATION

MAKING AND RECEIVING CALLS

To make a call, lift the handset and press TALK. The TALK indicator on the handset and the IN USE indicator on the base light. When you hear a dial tone, dial the number.

SETTING THE HANDSET VOLUME

You can choose one of four volume set- tings for the handset. To change the vol- ume, press VOL s or t during a call.

To answer a call, simply lift the handset from the base. If the handset is away from the base, you can press any key to answer a call.

The ET-1104 scans 20 channels (fre- quency pairs used between the base and the handset) and automatically se- lects a clear channel each time you make or receive a call.

Note: If the handset is too far from the base, the channel might not be clear. Move closer to the base and try making the call again.

To end a call, place the handset on the base or press TALK.

Note: If you press TALK to hang up and the phone does not disconnect, press TALK again while holding the handset closer to the base, or place the handset on the base.

USING REDIAL

You can quickly dial the last number di- aled. When you hear a dial tone, simply press REDIAL.

Notes:

•The redial memory holds up to 32 digits, so you can redial long- distance as well as local numbers.

•The redial memory also holds pause entries. See “Entering a Pause” on Page 16.

•The redial memory does not store a flash entry or any digits you press after FLASH (see “Using Flash” on Page 14).

13