Radio Shack ET-1112 Operation, Making and Receiving Calls, Setting the Handset Volume, Using Mute

43-1112.fm Page 10 Monday, September 13, 1999 5:08 PM

OPERATION

MAKING AND RECEIVING CALLS

To make a call, lift the handset and press TALK. The TALK indicator on the handset and the IN USE indicator on the base light. When you hear a dial tone, dial the number.

SETTING THE HANDSET VOLUME

You can choose one of four volume set- tings — low, medium, high, or maximum

—for the handset. To change the vol- ume, press or during a call.

TALK

To answer a call, lift the handset if nec- essary then press TALK.

The ET-1112 scans 20 channels (fre- quency pairs used between the base and the handset) and automatically se- lects a clear channel each time you make or receive a call.

Note: If the handset is too far from the base, the channel might not be clear. Move closer to the base and try making the call again.

To end a call, place the handset on the base or press TALK.

Note: If you press TALK to hang up and the phone does not disconnect, press TALK again while holding the handset closer to the base, or place the handset on the base.

10

USING REDIAL

You can quickly dial the last number di- aled. When you hear a dial tone, simply press REDIAL.

Notes:

•The redial memory holds up to 32 digits, so you can redial long-dis- tance as well as local numbers.

•The redial memory also holds pause entries. See “Entering a Pause” on Page 13.

REDIAL MUTE

USING MUTE

To talk to someone in the room without the person on the other end of the phone line hearing your conversation, press MUTE. The TALK/BATT indicator flashes.