5'66+0)"6*'"&+#.+0)"/1&'

Set TONE/PULSE on the bottom of the phone for the type of service you have. If you are not sure which type you have, do this simple test.

1.Set TONE/PULSE on the bottom of base to TONE.

2.Lift the handset, or press SPEAKER/HEADSET to listen for a dial tone.

3.Press any number other than 0. ±

#&,756+0)"6*'"4+0)'4" 81.7/'

Your phone has three ringer volume levels — high, medium, and low. Repeatedly press VOLUME or to adjust the volume level, even when a line is ringing.

/#-+0)1#059'4+0)"%#..5" 9+6*"6*'"*#0&5'6

To make a call, pick up the handset and select a line by pressing LINE 1, LINE 2, or LINE 3. When you hear the dial tone, dial the number.

When you receive a call on a line, the indicator for that line flashes and the phone rings. To answer the call, pick up the handset and the phone automatically selects the ringing line.

To help you tell which line is ringing, each line has a distinctive ring tone. LINE1 has a higher tone than LINE 2 and LINE 3. ±

75+0)"6*'"52'#-'42*10'

To make or answer a call using the speakerphone, press SPEAKER/HEADSET. The SPEAKER indicator lights and the phone automatically selects a free line or the line that is ringing. Or, you can also make or answer a call by pressing LINE 1, LINE 2, or LINE 3 to turn on the speakerphone. The SPEAKER indicator lights.

To end a speakerphone call, press SPEAKER/HEADSET. The SPEAKER indicator turns off.

±"016'"±"

If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press that number.

If the dial tone stops, you have touch-tone service. Leave TONE/PULSE set to TONE. If the dial tone continues, you have pulse service. Set TONE/ PULSE to PULSE.

±"016'"±"

The phone automatically selects the free line if you do not press LINE 1, LINE 2, or LINE 3.

When you receive a call on a line, the phone automatically selects the line that is ringing. If three lines are ringing at the same time, the phone selects LINE 1 as priority.

When one line is in use, and the other line is ringing (for example, LINE 1 is in use and LINE 2 is ringing), the LINE 1 automatically sounds two short beeps once to remind you the LINE 2 is ringing.

LINE 2 and LINE 3 do not operate during a power failure.

7

Page 7
Image 7
Radio Shack ET-1755 owner manual 566+06*&+#.+0/1, #&,756+06*4+04, #-+01#0594+0%#..5 9+6*6**#0&56, 75+06*52#-42*10