Radio Shack ET-1755 owner manual 064+0#2#75+0#//1407/$4, +#.+0#5614&07/$4, #+0&+#.+0548+%07/$45

±"016'"±"

Each PAUSE entry uses one digit of memory.

For an upper memory location, press a memory number button.

For a lower memory location, press LOWER, then a memory number button.

After completion, the LOWER indicator flashes.

To store additional numbers, repeat steps 1–3.

'06'4+0)"#"2#75'"+0"#"/'/14;"07/$'4

In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you should also store a pause after the access code to allow the outside line time to connect. To do so, press PAUSE to enter a 3-second pause. For a longer pause, press PAUSE again. ±

&+#.+0)"#"5614'&"07/$'4

To dial a stored number, lift the handset or press SPEAKER/ HEADSET, then:

To dial a number stored in upper memory, press the desired memory location number.

To dial a number stored in lower memory, press LOWER then the desired memory location number.

%*#+0"&+#.+0)"5'48+%'"07/$'45

You can make a call using more than one of the phone’s memory locations. This is called chain dialing. Chain dialing is useful for dialing special services such as alternate long distance or bank-by-phone.

6'56+0)"5614'&"'/'4)'0%;"07/$'45

If you store an emergency service’s number (police department, fire department, ambulance) and you want to test the stored number, make the test call during the late evening or early morning hours to avoid peak demand periods. Also, remain on the line to explain the reason for your call.

75+0)"6*'"2*10'"07/$'4"+0&': %#4&

1.Insert a small flat-blade screwdriver into the slot on the top of the base’s plastic cover, then lift and remove the cover.

10