To send an intercom signal from the cordless handset to

the corded phone, press INTCM on the cordless handset. ?DJ;H9EC appears on both the corded phone’s and the cordless handset’s displays. The corded phone beeps for about 15 seconds. Press PAGE/INTERCOM on the corded phone to talk with the cordless handset. The channel, ?DJ9C and the volume level appear on both the corded phone’s and cordless handset’s displays. Pick up the corded handset to talk if you do not want to use the speakerphone.

To exit the intercom mode, press PAGE/INTERCOM or SPEAKER on the corded phone, or INTCM or TALK on the cordless handset.

Note: If an incoming call is detected while using the intercom, the corded phone and the cordless handset beep about once every 4 seconds and the NEW CALL indicator on the corded phone flashes. To answer the call, press SPEAKER on the corded phone or TALK on the cordless handset, or pick up the corded handset.

TRANSFERRING A CALL

Between the Corded Handset and the Speakerphone

To transfer a call from the speakerphone to the corded phone, pick up the corded handset. The speakerphone turns off and the call is transferred to the corded handset. The SPEAKER indicator turns off.

To transfer a call from the corded phone to the speakerphone, press SPEAKER. The call is transferred to the speakerphone, and the SPEAKER indicator turns on. Place the corded handset in its cradle.

From the Corded Phone or the Speakerphone to the Cordless Handset

1.Press PAGE/INTERCOM on the corded phone to page the cordless phone. The call is placed on hold. F7=?D= appears on both the corded phone’s and the cordless handset’s displays, and the cordless handset beeps.

2.Press INTCM on the cordless handset to talk to the corded phone.

3.Press SPEAKER on the corded phone or hang up the corded handset to transfer the call to the cordless handset.

From the Cordless Handset to the Corded Phone

1.Press INTCM on the cordless handset to hold the call and send an intercom signal to the corded phone. ?DJ;H9EC appears on both the corded phone’s and

the cordless handset’s displays. The corded phone beeps.

2.Press PAGE/INTERCOM on the corded phone to talk to the cordless handset.

3.Press TALK on the cordless handset to transfer the call to the corded phone.

CONFERENCING

You can use the corded phone and the cordless handset to talk with an outside line at the same time.

When the corded phone is in use, press TALK on the cordless handset to start the conference call.

When the cordless handset is in use, pick up the corded handset or press SPEAKER to join the conversation. 87I; ?D KI; appears on the cordless handset. >7D:I;J ?D KI; appears on the corded phone. Both phones sound three short beeps.

Operation

13

Page 13
Image 13
Radio Shack ET-3507 owner manual Transferring a Call, Conferencing, Between the Corded Handset and the Speakerphone