43-1047.fm Page 9 Tuesday, August 17, 1999 11:37 AM

6.Route the adapter’s cord through the strain relief slot on top of the base and through the groove on the bottom of the base.

7.Plug the adapter into a standard AC outlet.

8.Align the keyhole slots with the mounting screws and slide the base downward to secure it.

9.Press and lift out the handset holder, rotate it 180°, then snap it back into place so it holds the handset.

10.Fully extend the base’s antenna and place it in a vertical position.

INSTALLING AND

CHARGING THE

BATTERY

The ET-547 comes with a recharge- able nickel-cadmium battery. Before using your phone, you must install the battery and then charge it for 15-24 hours.

1.Press down and slide off the handset’s battery compartment cover in the direction of the arrow.

2.Align the battery pack’s plastic connector with its socket and plug it in with the tab up. The plug fits only one way.

3.Place the battery inside the com- partment.

4.Replace the cover.

9

Page 9
Image 9
Radio Shack ET-547 owner manual Installing Charging Battery