43-1036.fm Page 10 Tuesday, August 17, 1999 9:52 AM

The CHARGE indicator on the base lights.

Recharge the battery when the BATT LOW indicator flashes.

Notes:

If the CHARGE indicator does not light when you place the handset on the base, be sure the battery and AC adapter are correctly and securely connected.

When you first use the phone after charging or recharging the battery, the phone might not work and you might hear an error tone. If this happens, return the handset to the base for about 5 seconds.

If the BATT LOW indicator does not light, but the phone does not work, recharge the battery. The battery charge might be too low to light the indicator.

If the battery pack gets weak dur- ing a call, the handset sounds a beep every 30 seconds, and the BATT LOW indicator flashes every 3 seconds. If this happens, you cannot make another call on the phone until you recharge the bat- tery.

About once a month, fully dis- charge the battery by keeping the handset off the base until the BATT LOW indicator lights. Other- wise, the battery loses its ability to fully recharge.

10

Using a pencil eraser, clean the charging contacts on the handset and the base about once a month to make sure they are not dirty or tarnished.

If the battery gets completely dis- charged, the ET-536/ET-549 loses the security access-protec- tion code. To reset the security code, place the handset on the base and charge the battery.

The supplied battery should last for about a year. When the battery loses its ability to fully recharge, order a replacement battery from your local RadioShack store (see “Replacing the Battery” on Page 19.

Page 10
Image 10
Radio Shack ET-549, ET-536 owner manual Fm Page 10 Tuesday, August 17, 1999 952 AM