Mounting the Base
Directly on the Wall
For this mounting method, you need two wood screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base.
1. Drill two holes 315/16 |
|
|
|
|
|
|
| |
|
|
|
|
| 5/1 | |||
|
|
|
| |||||
inches apart. Then |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| ||
thread a screw into |
|
|
|
|
|
|
| |
each hole, | letting | 315/16 |
|
|
|
|
|
|
the heads | extend |
|
|
|
|
|
|
|
about 5/16 inch from |
|
|
|
|
|
|
| |
the wall. |
|
|
|
|
| 5/1 | ||
|
|
|
|
| ||||
|
|
|
|
|
| |||
2.Plug one end of the supplied mod- ular cord into the TEL LINE jack on the back of the base.
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
4.Route the modular and adapter’s cords through both grooves on the bottom of the base.
Both | Both | |
Grooves | ||
Grooves | ||
|
5.Plug the adapter into a standard AC outlet. The POWER indicator on the base lights.
8
