Radio Shack ET-557 owner manual Storing a Tone Entry with a Memory Number, Entering a Pause

43-1057.fm Page 16 Tuesday, August 17, 1999 1:42 PM

5.For each stored number, write the person’s or company’s name next to the appropriate location number on the supplied MEMORY direc- tory sticker. Use a pencil in case you need to change the number later. Attach the sticker to the phone.

Note: To erase a number previously stored, simply store a new number in its place. Or, lift the handset and press MEMO twice, then press the priority di- aling button or the speed-dial memory location number (0-9) you want to clear. A tone sounds.

Storing a Tone Entry with a Memory Number

If your phone is set for pulse dialing, you can store a tone entry so you can easily access special services that re- quire tone signals.

16

1.Lift the handset and press MEMO. The TALK/BATT LOW indicator blinks.

2.Enter the phone number for the service you want to call.

3.Press TONE.

4.Enter the next number (the one that should be sent as tone sig- nals).

5.Press MEMO, then press the desired priority dialing button (P1, P2, or P3) or enter the desired speed-dial memory location (0-9). A tone indicates that the entire number is stored.

Entering a Pause

In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you must also store a pause after the access code to allow the outside line time to connect. To do so, press REDIAL. Each press enters a 4-second pause. For a longer pause, press REDIAL ad- ditional times.

Dialing a Memory Number

Follow these steps to dial a number stored in memory.

1. Lift the handset or press TALK.