1. Drill two holes 35/16 inches apart. Then thread a screw into each hole, letting the heads extend about 3/16 inch from the
3/164. Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
wall.
35/16
2.Plug one end of the supplied mod- ular cord into the TEL.LINE jack on the back of the base.
3.Route the modular cord through the right slots on the bottom of the base.
8
5.Route the adapter’s cord through the slot on top of the base and through the left slots on the bot- tom of the base.
6.Align the keyhole slots with the mounting screws and slide the base downward to secure it.
7.Plug the modular cord into a mod- ular phone line jack.
