Lexmark MS710 Change paper source to custom type name load orientation, Check tray x connection

Troubleshooting 185

Change [paper source] to [custom type name] load [orientation]

Try one or more of the following:

•Load the correct size and type of paper in the tray, and then press on the printer control panel.

Note: Make sure the paper size and type settings are specified in the Paper menu on the printer control panel.

•Cancel the print job.

Change [paper source] to [paper size] load [orientation]

Try one or more of the following:

•Load the correct size and type of paper in the tray, and then press on the printer control panel.

Note: Make sure the paper size and type settings are specified in the Paper menu on the printer control panel.

•Cancel the print job.

Change [paper source] to [paper type] [paper size] load [orientation]

Try one or more of the following:

•Load the correct size and type of paper in the tray, and then press on the printer control panel.

Note: Make sure the paper size and type settings are specified in the Paper menu on the printer control panel.

•Cancel the print job.

Check tray [x] connection

Try one or more of the following:

•Turn off the printer, and then turn it back on. If the error occurs a second time, then:

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the specified tray.

4 Reattach the tray.

5 Connect the power cord to a properly grounded electrical outlet.

6 Turn the printer back on. If the error occurs again, then: 1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the tray.

4 Contact customer support.

•From the printer control panel, press to clear the message and continue printing.