Lexmark MS710, MS835, MS832 manual Installing optional trays, Additional printer setup

Additional printer setup 32

Installing optional trays

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options. If you purchased a printer with a similar configuration, then you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

1Turn off the printer using the power switch, and then unplug the power cord from the electrical outlet.

2Unpack the optional tray, and then remove all packing material.

3Pull out the tray completely from the base.

4Remove any packing material from inside the tray.

5Insert the tray into the base.

6Place the tray near the printer.

7Align the optional tray with the caster base.

Note: Make sure to lock the wheels of the caster base to secure the printer.