Lexmark MS832 Finishing menu, Understanding printer menus 121, Download Target, Resource Save

Understanding printer menus 121

Use

Download Target

RAM

Flash

Disk

Resource Save

On

Off

To

Set the storage location for downloads.

Notes:

•RAM is the factory default setting. Storing downloads in the RAM is temporary.

•Storing downloads in a flash memory or in a printer hard disk places them in permanent storage. Downloads remain in the flash memory or on the printer hard disk even when the printer is turned off.

•This menu item appears only when an optional flash memory or a formatted, working printer hard disk is installed.

Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a print job that requires more than the available memory.

Notes:

•Off is the factory default setting. This sets the printer to retain downloads only until memory is needed. Downloads are deleted in order to process print jobs.

•On retains the downloads during language changes and printer resets. If the printer runs out of memory, then Memory Full [38] appears on the printer display, but downloads are not deleted.

Finishing menu

Use	To
Sides (Duplex)	Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
1 sided	Notes:
2 sided
	• “1 sided” is the factory default setting.
	• You can set two‑sided printing from the printer software.
	For Windows users:
	Click File > Print, and then click Properties, Preferences, Options, or Setup.
	For Macintosh users:
	Choose File > Print, and then adjust the settings from the Print dialog and pop‑up
	menus.
Duplex Binding	Define the way duplexed pages are bound and printed.
Long Edge	Notes:
Short Edge
	• Long Edge is the factory default setting. Long Edge assumes binding along the
	long edge of the page (left edge for portrait and top edge for landscape).
	• Short Edge assumes binding along the short edge of the page (top edge for
	portrait and left edge for landscape).
Copies	Specify the default number of copies for each print job.
1–999	Note: 1 is the factory default setting.