Lexmark MS835, MS832, MS710 manual Linking and unlinking trays, Click Settings Paper Menu

Loading paper and specialty media 66

•Make sure the paper or specialty media is below the maximum paper fill indicator.

Warning—Potential Damage: Overfilling the feeder can cause paper jams.

6For custom- or Universal-size paper, adjust the width guides to lightly touch the sides of the stack.

7From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Note: Set the correct paper size and type to avoid paper jams and print quality problems.

Linking and unlinking trays

Linking and unlinking trays

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer control panel in the TCP/IP section under the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > Paper Menu.

3Change the paper size and type settings for the trays you are linking.

•To link trays, make sure the paper size and type for the tray match that of the other tray.

•To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.

4Click Submit.