Lexmark MS835 Selecting a location for the printer, Other countries and regions-See the printed

Learning about the printer				9
	What are you looking for?		Find it here
	The latest supplemental information, updates, and customer		Lexmark support Web site—
	support:		http://support.lexmark.com
	•	Documentation	Note: Select your country or region, and then select
	•	Driver downloads	your product to view the appropriate support site.
	•	Live chat support	Support telephone numbers and hours of operation for
	•	E‑mail support	your country or region can be found on the support Web
			site or on the printed warranty that came with your
	•	Voice support	printer.
			Record the following information (located on the store
			receipt and at the back of the printer), and have it ready
			when you contact customer support so that they may
			serve you faster:
			•	Machine Type number
			•	Serial number
			•	Date purchased
			•	Store where purchased
	Warranty information		Warranty information varies by country or region:
			• In the U.S.—See the Statement of Limited Warranty
				included with this printer, or at
				http://support.lexmark.com.
			• In other countries and regions—See the printed
				warranty that came with your printer.

Selecting a location for the printer

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, then leave enough room for them also. It is important to:

•Set up the printer near a properly grounded and easily accessible electrical outlet.

•Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.

•Provide a flat, sturdy, and stable surface.

•Keep the printer:

–Clean, dry, and free of dust.

–Away from stray staples and paper clips.

–Away from the direct airflow of air conditioners, heaters, or ventilators.

–Free from direct sunlight and humidity extremes.

•Observe the recommended temperatures and avoid fluctuations:

Ambient temperature 15.6 to 32.2°C (60 to 90°F)

Storage temperature -40 to 43°C (-40 to 110°F)

•Allow the following recommended amount of space around the printer for proper ventilation: