Lexmark MS835, MS832, MS710 Understanding printer menus 114, Output Lighting, Alarms, Timeouts

Understanding printer menus		114
	Use	To
	Output Lighting	Set the amount of light from the bin.
	Normal/Standby Mode	Notes:
	Off
		• If Eco-Mode is set to Energy or Energy/Paper, then the
	Dim
		factory default setting is Dim.
	Bright
		• If Eco-Mode is set to Off or set to Paper, then the factory
		default setting is Bright.
		• This menu appears only when an indicator light is installed
		on the bin or when an optional bin with an indicator light is
		added.
	Alarms	Set an alarm when the printer requires user intervention.
	Alarm Control	When activated, Alarm Control lets you set the number of times
	Cartridge Alarm	that the alarm sounds, while Cartridge Alarm lets you stop printing
	Staple Alarm	when a cartridge-low condition occurs.
	Hole Punch Alarm	For each alarm type, select from the following options:
		Off
		Single
		Continuous
		Notes:
		• Off is the factory default setting for Cartridge Alarm, Staple
		Alarm, and Hole Punch Alarm. This means no alarm will
		sound.
		• Single is the factory default setting for Alarm Control. This
		sounds three quick beeps.
		• Continuous repeats three beeps every 10 seconds.
	Timeouts	Set the amount of time the printer waits after a job is printed before
	Sleep Mode	it goes into a reduced power state.
	Disabled	Notes:
	1–120	• 30 is the factory default setting.
		• Disabled appears only when Energy Conserve is set to Off.
		• Lower settings conserve more energy, but may require
		longer warm‑up times.
		• Select a high setting if the printer is in constant use. Under
		most circumstances, this keeps the printer ready to print
		with minimum warm‑up time.