Lexmark MS710 Imaging unit very low, x estimated pages remain 84.xy, Incompatible output bin x

Troubleshooting 188

Imaging unit very low, [x] estimated pages remain [84.xy]

You may need to replace the imaging unit very soon. For more information, see the “Replacing supplies” section of the User’s Guide.

If necessary, press on the printer control panel to clear the message and continue printing.

Incompatible output bin [x] [59]

Do either of the following:

•Remove the specified bin.

•From the printer control panel, press to clear the message and continue printing without using the specified bin.

Incompatible tray [x] [59]

Do either of the following:

•Remove the specified tray.

•From the printer control panel, press to clear the message and continue printing without using the specified tray.

Incorrect paper size, open [paper source] [34]

Try one or more of the following:

•Load the correct size of paper in the tray.

•From the printer control panel, press to clear the message and print using a different tray.

•Check the tray length and width guides and make sure the paper is loaded properly in the tray.

•Make sure the correct paper size and type are specified in Print Properties or in the Print dialog.

•Make sure the paper size and type settings are specified in the Paper menu on the printer control panel.

•Make sure the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, then make sure the paper is large enough for the data being printed.

•Cancel the print job.

Insert hole punch box

Insert the hole punch box into the finisher, and then press on the printer control panel to clear the message.

Insert staple cartridge

Do either of the following:

•Insert a staple cartridge. For more information, see the instruction sheet that came with the supply.

•From the printer control panel, press to clear the message and print without using the staple finisher.