Lexmark MS710, MS835, MS832 manual 242, Mode Description Power consumption Watts

Notices 242

Mode	Description	Power consumption (Watts)
Printing	The product is generating hard‑copy output from electronic inputs.	MS710, 780; MS711, 800
Copy	The product is generating hard‑copy output from hard‑copy original	N/A
	documents.
Scan	The product is scanning hard‑copy documents.	N/A
Ready	The product is waiting for a print job.	Ready 1, 100; Ready 2, 75
Sleep Mode	The product is in a high‑level energy‑saving mode.	4.8
Hibernate	The product is in a low‑level energy‑saving mode.	0.5
Off	The product is plugged into an electrical outlet, but the power switch is turned	0.1
	off.

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes):

30

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 180 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.

Hibernate Mode

This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely.

The Hibernate mode can be entered in any of the following methods:

• Using the Hibernate Timeout

• Using the Schedule Power modes

• Using the Sleep/Hibernate button

Factory default Hibernate Timeout for this product in all countries or regions except for EU countries and	Disabled
Switzerland
Factory default value for this product in EU countries or regions and Switzerland	3 days

The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month.