Lexmark MS832, MS835, MS710 manual Serial x menu, Understanding printer menus 106

Understanding printer menus		106
	Use	To
	Mac Binary PS	Set the printer to process Macintosh binary PostScript print jobs.
	On	Notes:
	Off
		• Auto is the factory default setting.
	Auto
		• Off filters print jobs using the standard protocol.
		• On processes raw binary PostScript print jobs.
	ENA Address	Set the network address information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
	ENA Netmask	Set the netmask information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
	ENA Gateway	Set the gateway information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.

Serial [x] menu

Note: This menu appears only when an optional serial card is installed.

Use	To
PCL SmartSwitch	Set the printer to automatically switch to PCL emulation when a print job received
On	through a serial port requires it, regardless of the default printer language.
Off	Notes:
	• On is the factory default setting.
	• When set to Off, the printer does not examine incoming data. The printer uses
	PostScript emulation if PS SmartSwitch is set to On. It uses the default printer
	language specified in the Setup menu if PS SmartSwitch is set to Off.
PS SmartSwitch	Set the printer to automatically switch to PS emulation when a print job received
On	through a serial port requires it, regardless of the default printer language.
Off	Notes:
	• On is the factory default setting.
	• When set to Off, the printer does not examine incoming data. The printer uses
	PCL emulation if PCL SmartSwitch is set to On. It uses the default printer
	language specified in the Setup menu if PCL SmartSwitch is set to Off.