Lexmark MS832 Ordering a fuser wiper, Ordering a maintenance kit, Maintaining the printer 148

Maintaining the printer 148

Ordering a fuser wiper

Part name

Oil wiper in bag

Wax wiper in bag

Part number

40x8579

40X8581

Ordering a maintenance kit

To identify the supported fuser type, view the label on the fuser. Do either of the following:

•Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 11 or 13) can be seen on the front of the fuser.

Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.

•Pull down the printer rear door. The two-digit fuser type code (such as 11 or 13) can be seen on the rear of the fuser.

Notes:

•Using certain types of paper may require more frequent replacement of the maintenance kit.

•The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and can be individually ordered and replaced if necessary.

•For more information on replacing the parts included in the maintenance kit, see the instruction sheet that came with each part.

Lexmark Return Program fuser maintenance kit type

Type	Part number
MS710 Series Return Program fuser maintenance kit type 11, 110–120V	40X8530
MS710 Series Return Program fuser maintenance kit type 13, 220–240V	40X8531
MS710 Series Return Program fuser maintenance kit type 15, 100V	40X8532

Lexmark regular fuser maintenance kit type

Type	Part number
MS710 Series regular fuser maintenance kit type 17, 110–120V	40X8533
MS710 Series regular fuser maintenance kit type 19, 220–240V	40X8534
MS710 Series regular fuser maintenance kit type 21, 100V	40X8535

Lexmark roller kit

MS710 Series roller kit

Part number

40X7706