Lexmark MS832, MS835, MS710 manual Understanding printer menus 118

Understanding printer menus		118
	Use	To
	Staple	Specify whether prints are stapled.
	Off	Notes:
	On
		• Off is the factory default setting.
		• On allows the printer to staple print jobs.
		• This menu appears only when a supported staple finisher is installed.
	Hole Punch	Specify whether prints have holes for binding.
	Off	Notes:
	On
		• Off is the factory default setting.
		• This menu appears only when a supported staple, hole punch finisher is
		installed.
	Hole Punch Mode	Specify the number of holes to be made on the prints.
	2 holes	Notes:
	3 holes
		• “3 holes” is the U.S. factory default setting. “4 holes” is the international
	4 holes
		factory default setting.
		• This menu appears only when a supported staple, hole punch finisher is
		installed.
	Duplex Binding	Define the way duplexed pages are bound and printed.
	Long Edge	Notes:
	Short Edge
		• Long Edge assumes binding along the long edge of the page (left edge for
		portrait and top edge for landscape). This is the factory default setting.
		• Short Edge assumes binding along the short edge of the page (top edge for
		portrait and left edge for landscape).
	Paper Saver Orientation	Specify the orientation of a multiple‑page document.
	Auto	Notes:
	Landscape
		• Auto is the factory default setting.
	Portrait
		• This setting affects jobs if the value of the Paper Saver setting in the same
		menu is not set to Off.
	Paper Saver	Specify that multiple‑page images be printed on one side of a paper.
	Off	Notes:
	2‑Up
		• Off is the factory default setting.
	3‑Up
		• The number selected is the number of page images that will print per side.
	4‑Up
	6‑Up
	9‑Up
	12‑Up
	16‑Up