Lexmark MS710, MS835, MS832 manual Replacing the fuser wiper cover assembly

Maintaining the printer 155

3Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge.

1

1

4Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge.

2

1

5Push the staple cartridge into the finisher until it clicks into place.

6Close the stapler door.

Replacing the fuser wiper cover assembly

1Turn off the printer.

2Squeeze the fuser wiper cover tab, and then lift to remove the cover assembly.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.