Lexmark MS835, MS832 Close door or insert cartridge, Close finisher rear door, Close rear door

Troubleshooting 186

Close door or insert cartridge

The toner cartridge is missing or not installed properly. Insert the cartridge, and then close all doors and covers.

Close finisher rear door

Close the rear door of the finisher.

Close rear door

Close the rear door of the printer.

Complex page, some data may not have printed [39]

Try one or more of the following:

•From the printer control panel, press to clear the message and continue printing.

•Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print job.

•Cancel the print job.

•Install additional printer memory.

Configuration change, some held jobs were not restored [57]

Held jobs are unavailable because of any of the following possible changes in the printer:

•The printer firmware has been updated.

•The tray for the print job is removed.

•The print job is sent from a flash drive that is no longer attached to the USB port.

•The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer model.

From the printer control panel, press to clear the message and continue printing.

Defective flash detected [51]

Try one or more of the following:

•Replace the defective flash memory card.

•From the printer control panel, press to ignore the message and continue printing.

•Cancel the current print job.