Lexmark MS710, MS835, MS832 manual Understanding printer menus 122, Separator Source

Understanding printer menus		122
	Use	To
	Blank Pages	Specify whether blank pages are inserted in a print job.
	Do Not Print	Note: Do Not Print is the factory default setting.
	Print
	Collate	Stack the pages of a print job in sequence when printing multiple copies.
	(1,1,1) (2,2,2)	Note: “(1,1,1) (2,2,2)” is the factory default setting.
	(1,2,3) (1,2,3)
	Separator Sheets	Specify whether blank separator sheets are inserted.
	Off	Notes:
	Between Copies
		• Off is the factory default setting.
	Between Jobs
		• Between Copies inserts a blank sheet between each copy of a print job if
	Between Pages
		Collate is set to “(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a
		blank page is inserted between each set of printed pages, such as after all
		page 1's and after all page 2's.
		• Between Jobs inserts a blank sheet between print jobs.
		• Between Pages inserts a blank sheet between each page of a print job. This
		setting is useful when printing transparencies or when inserting blank pages in
		a document.
	Separator Source	Specify the paper source for the separator sheet.
	Tray [x]	Notes:
	MP Feeder
		• Tray 1 (standard tray) is the factory default setting.
		• From the Paper menu, set Configure MP to "Cassette" for MP Feeder to
		appear as a menu setting.
	Paper Saver	Print multiple‑page images on one side of a paper.
	Off	Notes:
	2‑Up
		• Off is the factory default setting.
	3‑Up
		• The number selected is the number of page images that will print per side.
	4‑Up
	6‑Up
	9‑Up
	12‑Up
	16‑Up
	Paper Saver Ordering	Specify the positioning of multiple‑page images when using Paper Saver.
	Horizontal	Notes:
	Reverse Horizontal
		• Horizontal is the factory default setting.
	Reverse Vertical
		• Positioning depends on the number of page images and whether they are in
	Vertical
		portrait or landscape orientation.
	Paper Saver Orientation	Specify the orientation of a multiple‑page document.
	Auto	Note: Auto is the factory default setting. The printer chooses between portrait and
	Landscape	landscape.
	Portrait