Lexmark MS710, MS835, MS832 manual Configure Bins, Overflow Bin, Assign Type/Bin

Understanding printer menus		95
	Use	To
	Configure Bins	Specify configuration options for bins.
	Mailbox	Notes:
	Link
		• Mailbox is the factory default setting. This setting
	Mail Overflow
		treats each bin as a separate mailbox.
	Link Optional
		• Link configures all available bins as one large bin.
	Type Assignment
		• Mail Overflow configures each bin as a separate
		mailbox.
		• Link Optional links all available bins except the
		standard bin and only appears when at least two
		optional bins are installed.
		• Type Assignment assigns each paper type to a bin or
		linked bin set.
		• Bins assigned the same name are automatically
		linked unless Link Optional is selected.
	Overflow Bin	Specify an alternative bin when a designated bin is full.
	Standard Bin	Notes:
	Bin [x]
		• Standard Bin is the factory default setting.
		• If multiple bins are assigned the same name, then the
		name only appears once in the bin list.
		• [x] can be any number between 1 and 12 if the
		appropriate optional bins are installed.
	Assign Type/Bin	Select a bin for each supported paper type.
	Plain Paper Bin	For each type, select the following options:
	Card Stock Bin	Disabled
	Transparency Bin	Standard Bin
	Recycled Bin	Bin [x]
	Labels Bin	Notes:
	Vinyl Labels Bin
		• Disabled is the factory default setting.
	Bond Bin
		• [x] can be any number between 1 and 12 if the
	Letterhead Bin
	Preprinted Bin	appropriate optional bins are installed.
		• If multiple bins are assigned the same name, then the
	Colored Bin
	Light Paper Bin	name only appears once in the bin list.
	Heavy Paper Bin
	Rough/Cotton Bin
	Custom [x] Bin