Lexmark MS832, MS835, MS710 Quality menu, Job Accounting menu, Understanding printer menus 124

Understanding printer menus 124

Quality menu

Use	To
Print Resolution	Specify the printed output resolution in dots per inch.
300 dpi	Note: 600 dpi is the factory default setting.
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
Pixel Boost	Enable more pixels to print in clusters for clarity, in order to enhance images horizontally
Off	or vertically, or to enhance fonts.
Fonts	Note: Off is the factory default setting.
Horizontally
Vertically
Both directions
Isolated
Toner Darkness	Lighten or darken the printed output.
1–10	Notes:
	• 8 is the factory default setting.
	• Selecting a smaller number can help conserve toner.
Enhance Fine Lines	Enable a print mode preferable for files such as architectural drawings, maps, electrical
On	circuit diagrams, and flow charts.
Off	Notes:
	• Off is the factory default setting.
	• You can set this option from the printer software. For Windows users, click File >
	Print, and then click Properties, Preferences, Options, or Setup. For Macintosh
	users, choose File > Print, and then adjust the settings from the Print dialog and
	pop‑up menus.
	• To set this option using the Embedded Web Server, type the network printer IP
	address in the Web browser address field.
Gray Correction	Automatically adjust the contrast enhancement applied to images.
Auto	Note: Auto is the factory default setting.
Off
Brightness	Adjust the printed output either by lightening or darkening it. You can conserve toner
‑6 to 6	by lightening the output.
	Note: 0 is the factory default setting.
Contrast	Adjust the contrast of printed objects.
0–5	Note: 0 is the factory default setting.

Job Accounting menu

Note: This menu item appears only when a formatted, non-defective printer hard disk is installed. Make sure the printer hard disk is not read/write‑ or write‑protected.